A dull or chipped tub in Agua Fria does not need a demolition crew. It needs one technician, one day and a sprayed finish that shines.
One number reaches the technician who would hold the gun. The figure comes on the call, not after a visit.
(866) 951-0558The voice on the line belongs to the trade, not to a switchboard reading a script. Two minutes of plain description are enough to price a standard tub.
Maybe your old tub looks pretty rough right now. This is because years of scrubbin and harsh cleaners wear down that shiny outer layer. Fortunately, you do not have to spend thousands of dollars on a massive demolition job to get a sparkling clean surface again.
Actually, our team of local surface restoration pros can make your tub look brand new in just one day. This affordable solution saves you time and mess. If you want to see how easy it is, grab your free estimate from us today!
To start off, let us look at how this process works. Instead of ripping out your plumbing, we apply a fresh, durable liquid acrylic coating right over your existing fixture. This means we chemically bond a new glossy layer to the old cast iron or fiberglass.
First, we clean the surface with specialized acid cleaners to strip away soap scum. After that, we patch any deep chips or rust spots with a heavy duty polyester filler. This creates a perfectly flat base for the new look.
Next, we spray on a high tech bonding agent. This stuff acts like a super glue for the final topcoat. Which means your new finish will not peel or bubble up when you take hot showers.
Finally, we use professional spray equipment to apply several coats of a premium acrylic urethane. This leaves a beautiful, high gloss shine that mimics real porcelain. You get the same luxury feel without the high cost of a replacement.
Let us be honest about the nightmare of traditional remodeling. If you choose to replace a tub, you have to hire a plumber, a tile guy, and maybe a drywaller too. That quickly turns a simple update into a multi week headache.
On top of that, older homes often have heavy cast iron fixtures that are built like tanks. Removing them usually requires smashing them with a sledgehammer. That process can easily damage your bathroom floors and wall framing.
By opting for a professional spray resurfacing, you avoid all that chaos. We complete the entire job in about four to six hours. This lets you use your bathroom again the very next day.
To help you compare your options, we put together this handy table. It shows the real differences between these two home improvement paths.
| Factor | Professional Resurfacing | Full Replacement |
|---|---|---|
| Average Cost | Very affordable, usually under $600 | Can easily run $3,000 to $8,000 |
| Time to Complete | Less than one single day | One to two weeks of messy construction |
| Mess and Dust | Minimal, we mask off everything | Extreme drywall dust and heavy debris |
| Durability | Lasts 10 to 15 years with proper care | Lasts decades but requires major upfront cash |
Perhaps you are dealing with an ugly color from the 1970s. We see a lot of avocado green and dusty rose fixtures in older homes. Fortunately, we can change that outdated color to a modern, bright white.
Another common issue is rust around the drain area. This happens when water pools and eats through the original porcelain. We grind that rust away and apply rust inhibitors to stop it from returning.
Sometimes, fiberglass units get hairline cracks in the bottom. These cracks can leak water onto your subfloor and cause mold. We reinforce these weak spots with fiberglass mesh before we spray the new topcoat.
This repair process ensures your shower floor feels rock solid when you stand on it. No more creaking or flexing under your feet. Which means you can shower with total peace of mind.
Living in this dry, sunny pocket of Maricopa County presents unique challenges for home maintenance. The high mineral content in our local water supply can leave nasty calcium deposits on your fixtures. These stubborn white crusts are tough to scrub off without damaging the surface.
With a population of 3,894 residents, this cozy desert community boasts a relaxed lifestyle. Many homes here feature classic mid century build styles. Our local households, which enjoy a strong median household income, love finding smart ways to preserve these historic properties.
Whether you live in the 85363 area or nearby neighborhoods, we bring our specialized equipment straight to your doorstep. We know how the local heat affects drying times. This expertise helps us get the perfect cure on your new glossy finish every time.
Because we respect your home, we use powerful exhaust fans to vent all fumes outside. This keeps your indoor air clean and safe during the application. Your household can relax while we do the hard work.
Once we finish our work, you want that shine to last as long as possible. The secret lies in avoiding abrasive cleaning powders. You must never use steel wool or harsh bleach on a resurfaced fixture.
Instead, we recommend using mild dish soap or a specialized foam cleaner. These gentle options melt away soap scum without scratching the acrylic. This simple habit protects your investment for over a decade.
Additionally, you should avoid leaving wet bottles of shampoo or soap on the ledge. Standing water can eventually dull the finish over time. Using a hanging shower caddy is a great way to prevent this issue.
If you have dripping faucets, you should get them fixed quickly. Constant dripping in one spot will wear down even the toughest glaze. A quick washer replacement saves both your water bill and your beautiful tub.
Now is the perfect time to transform your bathroom from dull to dazzling. You do not have to live with a stained, hard to clean surface anymore. Our friendly team is ready to help you love your space again.
By choosing a local family business, you get personalized service and top notch craftsmanship. We take pride in our work and treat your home like our own. This commitment to quality shines through in every single job we complete.
To get started, simply reach out to us for a free quote. We will come out to inspect your fixture and give you an honest, upfront price. Let us take the hassle out of your bathroom upgrade today!
Three quiet stages carry the whole result. They are also the ones nobody sees in the after photo.
Stage 1 of 3
A reglaze fails or lasts on what happens before the gun comes out. The old surface gets scrubbed of soap film and silicone, etched or primed so the new material has something to grip, then wet sanded until it feels like fine paper. Skip any of that and the prettiest coat in the world lets go within a year, which is exactly the story most peeling tubs tell us.
Stage 2 of 3
Chips, rust blooms and worn drain rings are ground back to sound material and rebuilt with polyester filler, then sanded flush until a fingertip cannot find the spot. Coating over damage only photographs well on day one; a repair you cannot feel is what keeps the finish honest for years.
Stage 3 of 3
The topcoat goes on in fine sprayed passes with an extractor pulling air out the window the whole time. Sprayed layers flow together into one even skin, which is why the result reads as gloss rather than as paint. Brushes and rollers leave the texture that gives cheap refinishing its reputation.
Three real ways out of a worn tub. We only do the first one, so the other two columns are simply what we would tell a friend.
| The question | Reglazing in place | Acrylic liner | Full replacement |
|---|---|---|---|
| What a standard tub costs | $350 to $800 | $1,600 to $4,000 | $3,000 to $10,000 once walls and plumbing join in |
| Bathroom out of action | One day, then the cure | Weeks of lead time, then a fitting day | One to two weeks of trades |
| Demolition involved | None at all | None, but the old tub is sealed inside | Walls opened, floor patched, debris hauled |
| Honest life expectancy | Five years and up when cared for | Long, unless water creeps between the shells | Decades |
| Watch out for | Prep shortcuts by cut-rate crews | A spongy feel and hidden moisture | The budget doubling mid-project |
If your tub is cracked through, actively leaking underneath, or you simply want a different fixture, reglazing is the wrong tool, a verdict you will hear on the very first call.
Pass 1
Soap scum, silicone and old wax stripped, then the surface etched or bonded so the coating can bite.
Pass 2
Every ding ground out, filled and sanded flush. The repairs disappear under the coating instead of through it.
Pass 3
Tile, faucet, floor and glass papered off. Overspray lands on masking paper, never on grout or chrome.
Pass 4
Primer, then gloss coats laid on in thin passes until the surface reads as one poured skin.
Pass 5
The finish hardens on its own clock, 24 to 48 hours. We tape the door and leave the tub in peace.
Pass 6
Old caulk goes out with the old finish. A new mildew-resistant bead seals tub to tile on the way out.
A reglazed tub is your old tub wearing a professional coating. That is a fine thing to be, as long as everyone knows it going in.
A sprayed acrylic urethane skin, bonded to prepared porcelain, steel or fiberglass. It is smooth, glossy, warm to the touch and fully waterproof. Done properly it gives five years and more of daily service, and plenty of our tubs sail well past that with nothing but gentle cleaning.
It is not factory enamel fired onto iron at kiln temperatures, and no honest refinisher will tell you otherwise. It can be scratched by grit, dulled by harsh powders and lifted by standing water in a spot where caulk has failed. It is a durable coating, not a new tub, and it is priced like one.
Two minutes
ZIP, what the tub is made of, what bothers you about it. Said out loud it goes faster than typing, and a photo can follow later if the case is odd.
The same call
The technician who would do the work asks his questions and names a firm figure for a standard job, then confirms it in writing before any van is booked.
You set the date
One van, one technician, drop cloths from the front door to the bathroom. Water off for nothing; only the tub is out of service.
Most of that day
Damage filled and sanded, the room masked, extractor running, then the primer and gloss coats go on in thin, even passes.
24 to 48 hours
The finish hardens untouched, the new caulk bead goes in, and you run the first bath knowing exactly what was done and what to expect of it.
| What we quote | Typical range | Reading the number |
|---|---|---|
| Standard bathtub, reglazed complete | $350 - $800 | Clean, etch, repairs, sprayed gloss and fresh caulk. |
| Chip or rust repair alone | $150 - $300 | When the finish is sound and only one wound needs closing. |
| Clawfoot tub, inside and out | $700 - $1,300 | Two surfaces, more masking, and paint-grade feet if you wish. |
| Shower pan or base | $300 - $550 | Same process on the floor you stand on every morning. |
| Caulk renewal with the job | $90 - $180 | Old bead cut out, mildew-resistant line laid in. |
| Small job minimum | around $250 | The van, the materials and the cure time exist even for tiny work. |
Heavy previous coatings that must be stripped, unusual colors and badly pitted iron push a job toward the top of its bracket. The written price reaches you before the van is even loaded, and it holds.
Ventilation is not a courtesy, it is part of the job. The extractor runs from the first solvent wipe to the last sprayed pass, pulling air out the window instead of through your hallway, and the technician wears supplied air even when the household has gone out for the day. By the evening the bathroom smells like a bathroom again.
The materials are the professional two-part systems made for this trade, mixed fresh on site, never the single-can kits sold next to the paint rollers. It is the difference between a finish that cures into a hard skin and one that stays soft enough to peel at the drain within a season, and it is most of the reason our work carries a written workmanship promise against peeling and loss of adhesion.
And the schedule respects the cure. We tell you in writing when the tub goes back into service, 24 hours for most jobs and 48 for the cautious ones, because handing a family a beautiful surface and letting them ruin it that same night helps nobody. If anything in our workmanship lets go early, the technician comes back and makes it right without a discussion about whose fault the water was.
Strong while spraying, gone surprisingly fast. The extractor vents the room to the outside for the whole job around Agua Fria, so the rest of the home stays livable, and by the next morning the odor has left with the fumes. Pregnant households and bird owners get the frank version of this talk before booking.
Between 24 and 48 hours after the final coat, and the exact time is written on the paperwork you keep. The first bath is not a gamble; it is a date.
Any color. The most common request is retiring an avocado, pink or almond tub to white, and the coating is tinted before it is sprayed, so the new color is in the material rather than painted over it.
Yes. The prep changes, the primer changes, the result reads the same. Fiberglass with soft, flexing spots gets extra reinforcement talk first, because coating a moving floor is how warranties die.
Now the old coating comes fully off, which is honest work we price plainly, and then the job proceeds as if the tub had never been touched. Peeling almost always means the first crew skipped the etch or sprayed over silicone, not that your tub rejects coatings.
Five years is the floor we are comfortable promising out loud, not the ceiling. With soft cleaners, no standing mats and caulk kept sound, these finishes routinely serve a decade. What we refuse to do is whisper twenty and hope you lose our number.
Zoom for the lay of the land; the link lists further down name every community the van reaches from here.
The technician who picks up when you call works these streets, so the ledger below is home turf rather than trivia.
Somewhere under that worn surface is the tub you chose. One day brings it back.
Call (866) 951-0558