A dull or chipped tub in Auburn does not need a demolition crew. It needs one technician, one day and a sprayed finish that shines.
One number reaches the technician who would hold the gun. The figure comes on the call, not after a visit.
(866) 951-0558The voice on the line belongs to the trade, not to a switchboard reading a script. Two minutes of plain description are enough to price a standard tub.
You probably look at that scratched, dull porcelain every single morning and wish for something cleaner. Having a fresh, shiny surface without tearing your entire room apart is possible if you know the right trick.
Instead of spending thousands on a full renovation, you can choose to refresh the existing unit entirely. This clever process makes your outdated basin look brand new while saving you a ton of cash.
Sometimes people think that ripping out their old heavy iron or fiberglass unit is the only way to get a modern look. Removing a tub creates a massive mess that lasts for weeks in your home.
You end up dealing with expensive plumbing changes, broken tiles, and wasted materials that just fill up the local landfill. It turns a simple dream into a construction nightmare that leaves you feeling exhausted.
First, the technician arrives to thoroughly clean your existing unit with specialized chemicals that strip away years of grime. This step ensures that the new coating sticks perfectly to the base material without any peeling issues later.
Next, every little chip or crack gets filled with a durable resin compound that hardens into a smooth foundation. By carefully masking off the surrounding areas, you protect your precious walls and floor from any stray spray.
Once the preparation is complete, the pros apply a specialized high-tech polymer coating that dries into a rock-hard finish. This layer provides a wonderful sense of ease and total satisfaction because it feels smooth like new porcelain.
You save a huge amount of money by keeping the tub you already have in your house. The cost of this service is usually just a fraction of a full bathroom gut job.
Because the process takes only a single day, you do not have to live in a construction zone. You can start using your space again almost immediately after the finish cures fully.
Living in 83111, you appreciate the quiet charm of the region within Lincoln County. This area holds about 556 residents who value their homes and work hard to maintain their property values.
With a median household income of $66,908, people here know how to spend wisely on home improvements. You get the best value for your hard-earned money by choosing repairs over expensive full-scale replacements.
| Feature | Benefit for you | |
|---|---|---|
| Fast application | You get your bathroom back in one day | |
| Durable polymers | Your surface stays shiny for many years | |
| Cost-effective | You save thousands compared to total demolition | |
| Eco-friendly | You reduce waste by reusing your original tub |
If your basin has ugly rust stains, those are actually just surface-level corrosion that can be easily masked. The deep cleaning process eats through that orange buildup and leaves a clean slate behind for the new application.
Maybe your unit has lost its original shine and feels rough to the touch when you scrub it. That roughness comes from tiny pores that collect soap scum, but the new coating seals those gaps forever.
After the team sprays the new surface, it needs a little bit of time to harden completely. You should wait about twenty-four hours before filling it with water or scrubbing it down.
This waiting period ensures that the chemical bonds become as strong as humanly possible for long-term endurance. Think of it as letting a good steak rest after you take it off the grill.
You should avoid using harsh scouring pads or abrasive cleaners that could scratch the brand new surface. Mild soaps and a soft sponge will keep your tub looking pristine for a very long time.
On top of that, rinse the surface after each use to prevent any buildup from forming over time. This simple habit keeps the shine bright and helps you avoid hard scrubbing sessions in the future.
You might see those cheap kits at the hardware store and think you can handle it yourself. Let me be honest with you, it rarely ends well for the average homeowner.
Most of those store-bought solutions lack the industrial bonding agents that the professionals use on every single project. Without proper ventilation and professional spray equipment, you usually end up with a bumpy and uneven mess.
When you look for someone to handle this, you want a crew that knows exactly how to handle chemicals safely. You deserve a smooth result that does not show any streaks or drips after the work finishes.
Our team focuses on precise preparation because that is the secret to a job that actually lasts. You get a transparent, free estimate to see exactly what the work involves before anyone starts.
A sparkling bathroom makes your entire house feel much cleaner and more organized for your family. If you ever decide to list your home for sale, a restored tub adds significant value.
Potential buyers love seeing a bathroom that looks like it belongs in a modern catalog. You get to enjoy that feeling every single day, which makes your morning routine much more pleasant.
Does the new finish smell like harsh chemicals for a long time? The professional ventilation gear minimizes the odor, and it dissipates very quickly after the technician leaves your home.
Can you change the color of the tub during the process? Yes, you can choose from various shades of bright white or soft almond to match your existing tile work.
You might wonder if the new layer will start to flake off like cheap paint after a few months. That only happens when the surface prep was rushed, which is why we spend so much time cleaning.
Our high-quality resins bond at a molecular level to the old material. This means you get a long-lasting solution that stands up to daily showers and hot water without failing you.
Putting off home repairs usually leads to bigger problems like leaks or deeper stains that go into the subfloor. You want to stop that damage before it starts to cost you real money.
By requesting a free quote today, you take the first step toward reclaiming your space. You deserve a bathroom that feels like a place of comfort and absolute luxury.
You can reach out to us whenever you are ready to fix those ugly bathroom fixtures. We come to your location in Wyoming to inspect the tub and give you an honest price.
There is never any pressure to commit until you are completely ready to move forward. We believe in showing you the value before we ever ask for your business.
You work hard to maintain your property, and your bathroom should not be the thing that drags down your home style. Bringing that shine back is easier than you ever imagined it could be.
Take a look at your tub today and visualize how much better it would look with a fresh, glossy coat. You can have that look for a price that fits your budget perfectly.
If you want to see your bathroom transformed, send us a message to get your free estimate. Our team is ready to help you solve this once and for all.
Enjoy the peace of mind that comes with knowing your home is in great shape. You deserve a beautiful space, and we are here to help you get it.
Three quiet stages carry the whole result. They are also the ones nobody sees in the after photo.
Stage 1 of 3
A reglaze fails or lasts on what happens before the gun comes out. The old surface gets scrubbed of soap film and silicone, etched or primed so the new material has something to grip, then wet sanded until it feels like fine paper. Skip any of that and the prettiest coat in the world lets go within a year, which is exactly the story most peeling tubs tell us.
Stage 2 of 3
Chips, rust blooms and worn drain rings are ground back to sound material and rebuilt with polyester filler, then sanded flush until a fingertip cannot find the spot. Coating over damage only photographs well on day one; a repair you cannot feel is what keeps the finish honest for years.
Stage 3 of 3
The topcoat goes on in fine sprayed passes with an extractor pulling air out the window the whole time. Sprayed layers flow together into one even skin, which is why the result reads as gloss rather than as paint. Brushes and rollers leave the texture that gives cheap refinishing its reputation.
Three real ways out of a worn tub. We only do the first one, so the other two columns are simply what we would tell a friend.
| The question | Reglazing in place | Acrylic liner | Full replacement |
|---|---|---|---|
| What a standard tub costs | $350 to $800 | $1,600 to $4,000 | $3,000 to $10,000 once walls and plumbing join in |
| Bathroom out of action | One day, then the cure | Weeks of lead time, then a fitting day | One to two weeks of trades |
| Demolition involved | None at all | None, but the old tub is sealed inside | Walls opened, floor patched, debris hauled |
| Honest life expectancy | Five years and up when cared for | Long, unless water creeps between the shells | Decades |
| Watch out for | Prep shortcuts by cut-rate crews | A spongy feel and hidden moisture | The budget doubling mid-project |
If your tub is cracked through, actively leaking underneath, or you simply want a different fixture, reglazing is the wrong tool, a verdict you will hear on the very first call.
Pass 1
Soap scum, silicone and old wax stripped, then the surface etched or bonded so the coating can bite.
Pass 2
Every ding ground out, filled and sanded flush. The repairs disappear under the coating instead of through it.
Pass 3
Tile, faucet, floor and glass papered off. Overspray lands on masking paper, never on grout or chrome.
Pass 4
Primer, then gloss coats laid on in thin passes until the surface reads as one poured skin.
Pass 5
The finish hardens on its own clock, 24 to 48 hours. We tape the door and leave the tub in peace.
Pass 6
Old caulk goes out with the old finish. A new mildew-resistant bead seals tub to tile on the way out.
A reglazed tub is your old tub wearing a professional coating. That is a fine thing to be, as long as everyone knows it going in.
A sprayed acrylic urethane skin, bonded to prepared porcelain, steel or fiberglass. It is smooth, glossy, warm to the touch and fully waterproof. Done properly it gives five years and more of daily service, and plenty of our tubs sail well past that with nothing but gentle cleaning.
It is not factory enamel fired onto iron at kiln temperatures, and no honest refinisher will tell you otherwise. It can be scratched by grit, dulled by harsh powders and lifted by standing water in a spot where caulk has failed. It is a durable coating, not a new tub, and it is priced like one.
Two minutes
ZIP, what the tub is made of, what bothers you about it. Said out loud it goes faster than typing, and a photo can follow later if the case is odd.
The same call
The technician who would do the work asks his questions and names a firm figure for a standard job, then confirms it in writing before any van is booked.
You set the date
One van, one technician, drop cloths from the front door to the bathroom. Water off for nothing; only the tub is out of service.
Most of that day
Damage filled and sanded, the room masked, extractor running, then the primer and gloss coats go on in thin, even passes.
24 to 48 hours
The finish hardens untouched, the new caulk bead goes in, and you run the first bath knowing exactly what was done and what to expect of it.
| What we quote | Typical range | Reading the number |
|---|---|---|
| Standard bathtub, reglazed complete | $350 - $800 | Clean, etch, repairs, sprayed gloss and fresh caulk. |
| Chip or rust repair alone | $150 - $300 | When the finish is sound and only one wound needs closing. |
| Clawfoot tub, inside and out | $700 - $1,300 | Two surfaces, more masking, and paint-grade feet if you wish. |
| Shower pan or base | $300 - $550 | Same process on the floor you stand on every morning. |
| Caulk renewal with the job | $90 - $180 | Old bead cut out, mildew-resistant line laid in. |
| Small job minimum | around $250 | The van, the materials and the cure time exist even for tiny work. |
Heavy previous coatings that must be stripped, unusual colors and badly pitted iron push a job toward the top of its bracket. The written price reaches you before the van is even loaded, and it holds.
Ventilation is not a courtesy, it is part of the job. The extractor runs from the first solvent wipe to the last sprayed pass, pulling air out the window instead of through your hallway, and the technician wears supplied air even when the household has gone out for the day. By the evening the bathroom smells like a bathroom again.
The materials are the professional two-part systems made for this trade, mixed fresh on site, never the single-can kits sold next to the paint rollers. It is the difference between a finish that cures into a hard skin and one that stays soft enough to peel at the drain within a season, and it is most of the reason our work carries a written workmanship promise against peeling and loss of adhesion.
And the schedule respects the cure. We tell you in writing when the tub goes back into service, 24 hours for most jobs and 48 for the cautious ones, because handing a family a beautiful surface and letting them ruin it that same night helps nobody. If anything in our workmanship lets go early, the technician comes back and makes it right without a discussion about whose fault the water was.
Strong while spraying, gone surprisingly fast. The extractor vents the room to the outside for the whole job around Auburn, so the rest of the home stays livable, and by the next morning the odor has left with the fumes. Pregnant households and bird owners get the frank version of this talk before booking.
Between 24 and 48 hours after the final coat, and the exact time is written on the paperwork you keep. The first bath is not a gamble; it is a date.
Any color. The most common request is retiring an avocado, pink or almond tub to white, and the coating is tinted before it is sprayed, so the new color is in the material rather than painted over it.
Yes. The prep changes, the primer changes, the result reads the same. Fiberglass with soft, flexing spots gets extra reinforcement talk first, because coating a moving floor is how warranties die.
Now the old coating comes fully off, which is honest work we price plainly, and then the job proceeds as if the tub had never been touched. Peeling almost always means the first crew skipped the etch or sprayed over silicone, not that your tub rejects coatings.
Five years is the floor we are comfortable promising out loud, not the ceiling. With soft cleaners, no standing mats and caulk kept sound, these finishes routinely serve a decade. What we refuse to do is whisper twenty and hope you lose our number.
Zoom for the lay of the land; the link lists further down name every community the van reaches from here.
The technician who picks up when you call works these streets, so the ledger below is home turf rather than trivia.
Somewhere under that worn surface is the tub you chose. One day brings it back.
Call (866) 951-0558