A dull or chipped tub in Claryville does not need a demolition crew. It needs one technician, one day and a sprayed finish that shines.
One number reaches the technician who would hold the gun. The figure comes on the call, not after a visit.
(866) 951-0558The voice on the line belongs to the trade, not to a switchboard reading a script. Two minutes of plain description are enough to price a standard tub.
Your old tub probably looks like a horror movie prop right now.
If you are tired of staring at those ugly stains and scratches, there is an easy way out.
Our team restores your worn-out fixtures to a gorgeous, glossy state in just one afternoon.
This budget-friendly cosmetic makeover saves you thousands of dollars compared to a messy demolition.
Actually, most homeowners do not realize they can get a mirror-like shine without ripping out their drywall.
We bring our professional equipment straight to your doorstep in Campbell County to make your home feel fresh again.
Think about the last time you actually enjoyed soaking in your bathroom.
By choosing this smart restoration path, you bypass the dusty nightmare of traditional remodeling projects.
You deserve a space that feels clean, bright, and inviting every single day.
First, we clean the surface with specialized industrial prep agents to strip away decades of soap scum.
This critical step ensures that our advanced bonding agents grab onto the original porcelain or fiberglass.
Without this deep chemical clean, the new topcoat would just peel off like a cheap sticker.
Next, we repair every single chip, crack, and deep scratch using a durable polyester filler.
This meticulous patching process creates a perfectly flat surface that looks brand new.
You will not even remember where the old damage used to be once we finish.
After that, we spray multiple layers of a high-tech acrylic urethane coating using professional ventilation systems.
This specific material mimics the original factory glaze while resisting future chips and yellowing.
Your fixture ends up looking incredibly glossy and feels super smooth to the touch.
Finally, we let the new surface cure completely so it bonds permanently to the old substrate.
This chemical curing process creates an incredibly tough barrier against hot water and daily wear.
You can start using your beautiful, upgraded space again in just twenty-four hours.
To help you see the financial benefits, we put together a quick comparison of your options.
| Project Type | Average Cost | Time to Complete | Mess Factor |
|---|---|---|---|
| Full Replacement | $3,500 - $8,000 | 1 to 2 Weeks | Very High (Debris & Dust) |
| Surface Restoration | $400 - $900 | 4 to 6 Hours | Very Low (Fully Contained) |
As you can see, the savings are absolutely massive when you choose to restore instead of replace.
This extra cash stays in your wallet, which is great for local families watching their household budget closely.
You get the exact same visual result without the headache of hiring plumbers and drywall contractors.
On top of that, your old cast iron tub is likely of much better quality than modern plastic ones.
Keeping that heavy, heat-retaining beast in place is actually a major upgrade for your soaking experience.
We simply make it look like it just rolled off the showroom floor.
Living in this lovely area with a median household income of $89,911 means you value quality craftsmanship.
We respect your home and treat it with the utmost care while we work.
Our technicians use heavy-duty plastic sheeting and exhaust fans to protect your indoor air quality.
Because we live and work nearby, we can easily visit your home to assess the damage.
This proximity allows us to offer incredibly fast scheduling and personalized customer care.
You are not just another number on a spreadsheet to our local team.
Whether you reside near the local parks or closer to the highway, we know the area well.
Our service vehicles are always stocked with premium materials to get the job done right the first time.
We take immense pride in helping our neighbors upgrade their properties without breaking the bank.
Absolutely not, because we use professional spray equipment that lays down an incredibly flat, glassy layer. This advanced technique eliminates brush marks and runs, leaving a factory-perfect sheen. Your guests will honestly believe you bought a brand new fixture.
Which means you get all the aesthetic benefits of a remodel without the massive price tag.
Our high-gloss finish reflects light beautifully, making your entire bathroom feel much larger and brighter.
It is a simple trick that completely transforms the vibe of your home.
With proper care and non-abrasive cleaners, your newly coated surface will look pristine for up to fifteen years. This impressive longevity depends on avoiding harsh chemicals like bleach or steel wool scrubbers. We always provide a detailed care sheet so you know exactly how to protect your investment.
Moreover, we use bonding agents that are specifically designed to handle constant moisture and temperature swings.
This prevents the peeling issues that often plague cheap DIY kits from the local hardware store.
Our professional-grade materials are built to stand the test of time.
Yes, we can definitely tackle severe rust damage by grinding it down to bare metal first. This stops the corrosion from spreading under the new surface and causing future bubbles. We then apply a rust-inhibiting primer before continuing with the rest of the restoration steps.
This attention to detail ensures that the structural integrity of your fixture remains completely safe.
You do not have to worry about leaks ruining your subfloor or ceiling below.
We fix the root cause of the issue rather than just covering it up.
To keep your restored surface looking spectacular, always opt for mild dish soap or liquid cleaners.
These gentle soaps easily wash away dirt without scratching the delicate, glossy protective layer.
A quick wipe with a microfiber cloth after each use works wonders.
Avoid leaving wet bottles or soap bars sitting directly on the ledge for weeks.
This pooling water can eventually dull the finish over several years of neglect.
Using a hanging shower caddy is an easy way to keep things dry and beautiful.
Never use suction cup mats on the newly coated bottom of your basin.
The constant pulling action of the suction cups can slowly weaken the bond of the coating over time.
We can actually apply a permanent, built-in non-slip texture during our process to keep you safe.
If you are ready to say goodbye to that ugly, hard-to-clean surface, we are here to help.
Our friendly team provides completely free, no-obligation quotes for homeowners right here in Claryville, Kentucky.
We will look at your fixture, explain our process, and give you an honest price on the spot.
This quick call is the first step toward reclaiming your peace of mind in your own home.
You do not have to live with embarrassing stains or rough surfaces that scratch your skin.
Let us do the hard work so you can finally relax in a sparkling clean oasis.
Our scheduling is flexible, and we work quickly to minimize any disruption to your daily routine.
We arrive on time, clean up our mess, and leave your bathroom looking absolutely spectacular.
Reach out to us today to schedule your free estimate and start your stress-free home upgrade.
Three quiet stages carry the whole result. They are also the ones nobody sees in the after photo.
Stage 1 of 3
A reglaze fails or lasts on what happens before the gun comes out. The old surface gets scrubbed of soap film and silicone, etched or primed so the new material has something to grip, then wet sanded until it feels like fine paper. Skip any of that and the prettiest coat in the world lets go within a year, which is exactly the story most peeling tubs tell us.
Stage 2 of 3
Chips, rust blooms and worn drain rings are ground back to sound material and rebuilt with polyester filler, then sanded flush until a fingertip cannot find the spot. Coating over damage only photographs well on day one; a repair you cannot feel is what keeps the finish honest for years.
Stage 3 of 3
The topcoat goes on in fine sprayed passes with an extractor pulling air out the window the whole time. Sprayed layers flow together into one even skin, which is why the result reads as gloss rather than as paint. Brushes and rollers leave the texture that gives cheap refinishing its reputation.
Three real ways out of a worn tub. We only do the first one, so the other two columns are simply what we would tell a friend.
| The question | Reglazing in place | Acrylic liner | Full replacement |
|---|---|---|---|
| What a standard tub costs | $350 to $800 | $1,600 to $4,000 | $3,000 to $10,000 once walls and plumbing join in |
| Bathroom out of action | One day, then the cure | Weeks of lead time, then a fitting day | One to two weeks of trades |
| Demolition involved | None at all | None, but the old tub is sealed inside | Walls opened, floor patched, debris hauled |
| Honest life expectancy | Five years and up when cared for | Long, unless water creeps between the shells | Decades |
| Watch out for | Prep shortcuts by cut-rate crews | A spongy feel and hidden moisture | The budget doubling mid-project |
If your tub is cracked through, actively leaking underneath, or you simply want a different fixture, reglazing is the wrong tool, a verdict you will hear on the very first call.
Pass 1
Soap scum, silicone and old wax stripped, then the surface etched or bonded so the coating can bite.
Pass 2
Every ding ground out, filled and sanded flush. The repairs disappear under the coating instead of through it.
Pass 3
Tile, faucet, floor and glass papered off. Overspray lands on masking paper, never on grout or chrome.
Pass 4
Primer, then gloss coats laid on in thin passes until the surface reads as one poured skin.
Pass 5
The finish hardens on its own clock, 24 to 48 hours. We tape the door and leave the tub in peace.
Pass 6
Old caulk goes out with the old finish. A new mildew-resistant bead seals tub to tile on the way out.
A reglazed tub is your old tub wearing a professional coating. That is a fine thing to be, as long as everyone knows it going in.
A sprayed acrylic urethane skin, bonded to prepared porcelain, steel or fiberglass. It is smooth, glossy, warm to the touch and fully waterproof. Done properly it gives five years and more of daily service, and plenty of our tubs sail well past that with nothing but gentle cleaning.
It is not factory enamel fired onto iron at kiln temperatures, and no honest refinisher will tell you otherwise. It can be scratched by grit, dulled by harsh powders and lifted by standing water in a spot where caulk has failed. It is a durable coating, not a new tub, and it is priced like one.
Two minutes
ZIP, what the tub is made of, what bothers you about it. Said out loud it goes faster than typing, and a photo can follow later if the case is odd.
The same call
The technician who would do the work asks his questions and names a firm figure for a standard job, then confirms it in writing before any van is booked.
You set the date
One van, one technician, drop cloths from the front door to the bathroom. Water off for nothing; only the tub is out of service.
Most of that day
Damage filled and sanded, the room masked, extractor running, then the primer and gloss coats go on in thin, even passes.
24 to 48 hours
The finish hardens untouched, the new caulk bead goes in, and you run the first bath knowing exactly what was done and what to expect of it.
| What we quote | Typical range | Reading the number |
|---|---|---|
| Standard bathtub, reglazed complete | $350 - $800 | Clean, etch, repairs, sprayed gloss and fresh caulk. |
| Chip or rust repair alone | $150 - $300 | When the finish is sound and only one wound needs closing. |
| Clawfoot tub, inside and out | $700 - $1,300 | Two surfaces, more masking, and paint-grade feet if you wish. |
| Shower pan or base | $300 - $550 | Same process on the floor you stand on every morning. |
| Caulk renewal with the job | $90 - $180 | Old bead cut out, mildew-resistant line laid in. |
| Small job minimum | around $250 | The van, the materials and the cure time exist even for tiny work. |
Heavy previous coatings that must be stripped, unusual colors and badly pitted iron push a job toward the top of its bracket. The written price reaches you before the van is even loaded, and it holds.
Ventilation is not a courtesy, it is part of the job. The extractor runs from the first solvent wipe to the last sprayed pass, pulling air out the window instead of through your hallway, and the technician wears supplied air even when the household has gone out for the day. By the evening the bathroom smells like a bathroom again.
The materials are the professional two-part systems made for this trade, mixed fresh on site, never the single-can kits sold next to the paint rollers. It is the difference between a finish that cures into a hard skin and one that stays soft enough to peel at the drain within a season, and it is most of the reason our work carries a written workmanship promise against peeling and loss of adhesion.
And the schedule respects the cure. We tell you in writing when the tub goes back into service, 24 hours for most jobs and 48 for the cautious ones, because handing a family a beautiful surface and letting them ruin it that same night helps nobody. If anything in our workmanship lets go early, the technician comes back and makes it right without a discussion about whose fault the water was.
Strong while spraying, gone surprisingly fast. The extractor vents the room to the outside for the whole job around Claryville, so the rest of the home stays livable, and by the next morning the odor has left with the fumes. Pregnant households and bird owners get the frank version of this talk before booking.
Between 24 and 48 hours after the final coat, and the exact time is written on the paperwork you keep. The first bath is not a gamble; it is a date.
Any color. The most common request is retiring an avocado, pink or almond tub to white, and the coating is tinted before it is sprayed, so the new color is in the material rather than painted over it.
Yes. The prep changes, the primer changes, the result reads the same. Fiberglass with soft, flexing spots gets extra reinforcement talk first, because coating a moving floor is how warranties die.
Now the old coating comes fully off, which is honest work we price plainly, and then the job proceeds as if the tub had never been touched. Peeling almost always means the first crew skipped the etch or sprayed over silicone, not that your tub rejects coatings.
Five years is the floor we are comfortable promising out loud, not the ceiling. With soft cleaners, no standing mats and caulk kept sound, these finishes routinely serve a decade. What we refuse to do is whisper twenty and hope you lose our number.
Zoom for the lay of the land; the link lists further down name every community the van reaches from here.
The technician who picks up when you call works these streets, so the ledger below is home turf rather than trivia.
Somewhere under that worn surface is the tub you chose. One day brings it back.
Call (866) 951-0558