A dull or chipped tub in Dundee does not need a demolition crew. It needs one technician, one day and a sprayed finish that shines.
One number reaches the technician who would hold the gun. The figure comes on the call, not after a visit.
(866) 951-0558The voice on the line belongs to the trade, not to a switchboard reading a script. Two minutes of plain description are enough to price a standard tub.
You probably look at that old, chipped basin and sigh because it just ruins the whole vibe of your bathroom. Replacing it costs a fortune, but you can actually make it look brand new without the massive headache of a full renovation.
Getting a fresh finish on your worn-out fixtures is the smartest way to upgrade your home in this quiet corner of Yamhill County. You save piles of cash while getting that shiny, smooth aesthetic you crave for your morning routine.
Instead of ripping out the cast iron or fiberglass, a skilled hand cleans the surface with industrial solvents to strip away soap scum and grime. This careful prep work means the new coating sticks like glue, giving you a finish that lasts for years.
After scrubbing, the pro fills in those annoying cracks and nicks with special bonding fillers so you get a perfectly flat base. Once that is done, the sprayer applies a high-tech polymer coating that feels just as good as the original factory glaze.
You definitely do not want to spend thousands of dollars just because your tub lost its luster or turned an ugly shade of yellow. The cost of a full demo includes plumbing changes, new tile work, and way too much time with contractors in your house.
By choosing to refinish instead of replace, you avoid the dusty demolition phase that leaves debris all over your home. You gain a pristine, bright space for a fraction of the cost, which makes your daily habits feel much more luxurious.
| Benefit | Why you want it |
| Lower Price | Keep your savings for better things |
| Less Mess | No jackhammers or broken tile piles |
| Speed | Done in a single day usually |
| Durability | Hard surfaces that resist stains easily |
Living in this beautiful town of 3,219 people means you value your property and your neighborhood character. With a median household income around $77,656, you are smart enough to look for ways to boost value without throwing money down the drain.
You know that visitors and potential buyers notice the state of the bathroom first thing when they walk into a home. A bright, clean, and modern-looking soaking spot creates a sense of serenity that makes the whole house feel much more inviting.
You might wonder if the smell is going to be terrible, but professionals use special ventilation fans to push the fumes right out the window. This setup keeps the air in your house safe while they work their magic on your worn-out tub surfaces.
Because the materials are so strong, you can easily clean them with standard mild soaps without worrying about scratching the finish. You get a result that mimics the snugness of a high-end hotel tub without the ridiculous price tag attached.
Replacing a tub often involves cutting through walls and disrupting your plumbing lines, which can lead to leaks if not done right. On top of that, you are stuck without a working bathroom for days or even weeks during a full overhaul.
Conversely, our method lets you use your space again after just twenty-four hours of curing time. Which means you can go back to your relaxing evening soak almost immediately without the stress of managing a massive construction crew.
You deserve someone who treats your home with respect and understands the local market in Oregon. Since this region is famous for its vineyards, you likely appreciate craftsmanship and things that improve with age when they are taken care of properly.
Asking for a free estimate is the best way to see exactly what needs to happen to bring your fixture back to life. You get to talk to a person who can look at the damage and explain the steps they will take.
Some people worry that the finish will peel off after a couple of months, but that only happens if the person doing the work skips the prep. When you choose someone who takes the time to etch the surface correctly, the bond is incredibly strong.
Another myth is that it only looks good from a distance, but the truth is the finish is glossy and smooth to the touch. You get that feeling of pure bliss when you run your hand along the edge of your revitalized basin.
You spend a lot of time in your bathroom, so having a surface that looks dingy can really impact your mood. When the finish is bright white or a custom color, the entire room feels bigger and way more open than before.
This simple change also makes cleaning a breeze because smooth, non-porous surfaces do not trap dirt or bacteria like old, porous surfaces do. You spend less time scrubbing and more time enjoying the space you worked hard to create.
You invite a local pro to your home so they can inspect the material of your tub, whether it is porcelain, steel, or fiberglass. They check for deep gouges or structural issues that might need extra attention before the spray goes on.
This interaction is the perfect chance for you to ask questions about the colors or the finish options available for your specific bathroom layout. You walk away with a clear price and a plan that fits your budget perfectly.
Once the work is done, you should avoid harsh abrasive powders that might dull the shine of the new coating. Stick to soft sponges and gentle cleaners to keep that glossy look shining for many years to come.
Also, be sure to keep the area around the drain free of standing water to prevent mineral buildup. It is a simple habit, but it ensures your investment stays looking brand new for a long time.
You are ready to transform your bathroom into a space that reflects your style and your attention to detail. Skipping the massive construction chaos is the smartest move you can make for your sanity and your savings account.
Now is the moment to reach out and schedule a time for someone to come out and assess your needs. You are one step closer to having that perfectly smooth, clean, and bright bathing space you deserve in your wonderful home.
Three quiet stages carry the whole result. They are also the ones nobody sees in the after photo.
Stage 1 of 3
A reglaze fails or lasts on what happens before the gun comes out. The old surface gets scrubbed of soap film and silicone, etched or primed so the new material has something to grip, then wet sanded until it feels like fine paper. Skip any of that and the prettiest coat in the world lets go within a year, which is exactly the story most peeling tubs tell us.
Stage 2 of 3
Chips, rust blooms and worn drain rings are ground back to sound material and rebuilt with polyester filler, then sanded flush until a fingertip cannot find the spot. Coating over damage only photographs well on day one; a repair you cannot feel is what keeps the finish honest for years.
Stage 3 of 3
The topcoat goes on in fine sprayed passes with an extractor pulling air out the window the whole time. Sprayed layers flow together into one even skin, which is why the result reads as gloss rather than as paint. Brushes and rollers leave the texture that gives cheap refinishing its reputation.
Three real ways out of a worn tub. We only do the first one, so the other two columns are simply what we would tell a friend.
| The question | Reglazing in place | Acrylic liner | Full replacement |
|---|---|---|---|
| What a standard tub costs | $350 to $800 | $1,600 to $4,000 | $3,000 to $10,000 once walls and plumbing join in |
| Bathroom out of action | One day, then the cure | Weeks of lead time, then a fitting day | One to two weeks of trades |
| Demolition involved | None at all | None, but the old tub is sealed inside | Walls opened, floor patched, debris hauled |
| Honest life expectancy | Five years and up when cared for | Long, unless water creeps between the shells | Decades |
| Watch out for | Prep shortcuts by cut-rate crews | A spongy feel and hidden moisture | The budget doubling mid-project |
If your tub is cracked through, actively leaking underneath, or you simply want a different fixture, reglazing is the wrong tool, a verdict you will hear on the very first call.
Pass 1
Soap scum, silicone and old wax stripped, then the surface etched or bonded so the coating can bite.
Pass 2
Every ding ground out, filled and sanded flush. The repairs disappear under the coating instead of through it.
Pass 3
Tile, faucet, floor and glass papered off. Overspray lands on masking paper, never on grout or chrome.
Pass 4
Primer, then gloss coats laid on in thin passes until the surface reads as one poured skin.
Pass 5
The finish hardens on its own clock, 24 to 48 hours. We tape the door and leave the tub in peace.
Pass 6
Old caulk goes out with the old finish. A new mildew-resistant bead seals tub to tile on the way out.
A reglazed tub is your old tub wearing a professional coating. That is a fine thing to be, as long as everyone knows it going in.
A sprayed acrylic urethane skin, bonded to prepared porcelain, steel or fiberglass. It is smooth, glossy, warm to the touch and fully waterproof. Done properly it gives five years and more of daily service, and plenty of our tubs sail well past that with nothing but gentle cleaning.
It is not factory enamel fired onto iron at kiln temperatures, and no honest refinisher will tell you otherwise. It can be scratched by grit, dulled by harsh powders and lifted by standing water in a spot where caulk has failed. It is a durable coating, not a new tub, and it is priced like one.
Two minutes
ZIP, what the tub is made of, what bothers you about it. Said out loud it goes faster than typing, and a photo can follow later if the case is odd.
The same call
The technician who would do the work asks his questions and names a firm figure for a standard job, then confirms it in writing before any van is booked.
You set the date
One van, one technician, drop cloths from the front door to the bathroom. Water off for nothing; only the tub is out of service.
Most of that day
Damage filled and sanded, the room masked, extractor running, then the primer and gloss coats go on in thin, even passes.
24 to 48 hours
The finish hardens untouched, the new caulk bead goes in, and you run the first bath knowing exactly what was done and what to expect of it.
| What we quote | Typical range | Reading the number |
|---|---|---|
| Standard bathtub, reglazed complete | $350 - $800 | Clean, etch, repairs, sprayed gloss and fresh caulk. |
| Chip or rust repair alone | $150 - $300 | When the finish is sound and only one wound needs closing. |
| Clawfoot tub, inside and out | $700 - $1,300 | Two surfaces, more masking, and paint-grade feet if you wish. |
| Shower pan or base | $300 - $550 | Same process on the floor you stand on every morning. |
| Caulk renewal with the job | $90 - $180 | Old bead cut out, mildew-resistant line laid in. |
| Small job minimum | around $250 | The van, the materials and the cure time exist even for tiny work. |
Heavy previous coatings that must be stripped, unusual colors and badly pitted iron push a job toward the top of its bracket. The written price reaches you before the van is even loaded, and it holds.
Ventilation is not a courtesy, it is part of the job. The extractor runs from the first solvent wipe to the last sprayed pass, pulling air out the window instead of through your hallway, and the technician wears supplied air even when the household has gone out for the day. By the evening the bathroom smells like a bathroom again.
The materials are the professional two-part systems made for this trade, mixed fresh on site, never the single-can kits sold next to the paint rollers. It is the difference between a finish that cures into a hard skin and one that stays soft enough to peel at the drain within a season, and it is most of the reason our work carries a written workmanship promise against peeling and loss of adhesion.
And the schedule respects the cure. We tell you in writing when the tub goes back into service, 24 hours for most jobs and 48 for the cautious ones, because handing a family a beautiful surface and letting them ruin it that same night helps nobody. If anything in our workmanship lets go early, the technician comes back and makes it right without a discussion about whose fault the water was.
Strong while spraying, gone surprisingly fast. The extractor vents the room to the outside for the whole job around Dundee, so the rest of the home stays livable, and by the next morning the odor has left with the fumes. Pregnant households and bird owners get the frank version of this talk before booking.
Between 24 and 48 hours after the final coat, and the exact time is written on the paperwork you keep. The first bath is not a gamble; it is a date.
Any color. The most common request is retiring an avocado, pink or almond tub to white, and the coating is tinted before it is sprayed, so the new color is in the material rather than painted over it.
Yes. The prep changes, the primer changes, the result reads the same. Fiberglass with soft, flexing spots gets extra reinforcement talk first, because coating a moving floor is how warranties die.
Now the old coating comes fully off, which is honest work we price plainly, and then the job proceeds as if the tub had never been touched. Peeling almost always means the first crew skipped the etch or sprayed over silicone, not that your tub rejects coatings.
Five years is the floor we are comfortable promising out loud, not the ceiling. With soft cleaners, no standing mats and caulk kept sound, these finishes routinely serve a decade. What we refuse to do is whisper twenty and hope you lose our number.
Zoom for the lay of the land; the link lists further down name every community the van reaches from here.
The technician who picks up when you call works these streets, so the ledger below is home turf rather than trivia.
Somewhere under that worn surface is the tub you chose. One day brings it back.
Call (866) 951-0558