A dull or chipped tub in Florence does not need a demolition crew. It needs one technician, one day and a sprayed finish that shines.
One number reaches the technician who would hold the gun. The figure comes on the call, not after a visit.
(866) 951-0558The voice on the line belongs to the trade, not to a switchboard reading a script. Two minutes of plain description are enough to price a standard tub.
Looking for a quick way to restore your old worn basin without replacing it entirely today? You can save thousands of dollars while getting a shiny smooth surface that looks brand new again. Request your free quote now to see how affordable this easy home update can be!
Actually, taking out a huge heavy fixture from your washroom turns into a messy nightmare fast. Demolition crew workers knock holes through your drywall just to haul that giant tub away. Honestly, you end up paying for new tile work, extra plumbing labor, and floor repairs.
Besides, those costs add up way too fast for a average budget. Refinishing the existing surface avoids all that pure chaos completely. Furthermore, it saves you a boatload of cash while keeping your classic heavy iron or acrylic shell intact.
Honestly, the mess alone from a full teardown gives folks serious headaches. Dust gets everywhere in your house for weeks. Luckily, resurfacing keeps the whole project contained right inside your washroom space.
On top of that, you get to keep the original rock-solid fixture that was built to last. Many older homes have heavy cast iron units that hold heat way better than modern cheap plastic ones. Therefore, applying a modern high-gloss coat protects that quality foundation while fixing all the ugly stains.
Surprisingly, the turnaround time for this job will blow your mind. A complete rip-out project takes up to two full weeks of noisy work. In contrast, spraying a fresh coat takes just a single afternoon.
| Project Choice | Time Needed | Mess Level | Average Cost |
|---|---|---|---|
| Full Replacement | 1 to 2 Weeks | Very High Dust | High Expenses |
| Surface Refinishing | 4 to 6 Hours | Low And Contained | Super Affordable |
First off, your technician scrubs down the old finish with heavy cleaners to strip off soap scum. Any remaining oil or grime prevents the new coating from sticking right. So, this first step takes a lot of elbow grease and patience.
Next, we fix every tiny chip, crack, and scratch with special fill material. After that cures, we sand it smooth until you cannot even tell where the damage was. That way, the new shell goes on completely flat without bumps.
Then, we carefully mask off your entire washroom using thick plastic sheets and tape. This protects your walls, sink, and toilet from any unwanted tiny floating spray drops. Furthermore, powerful exhaust fans vent all fumes directly outside your home so your air stays clean.
Afterward, a special chemical bonding agent gets applied across the bare porcelain or fiberglass. This acts like powerful liquid glue for the top layer. Without this vital liquid, the shiny new surface would just peel off after a few hot showers.
Finally, multiple layers of synthetic high-tech resin get sprayed evenly over the whole basin. This creates a thick hard barrier that looks like fresh factory enamel. Then, it cures quickly into a tough surface that handles daily family use easily.
Maybe your washroom basin has turned an ugly faded avocado green from several decades ago. Or perhaps years of harsh bleach cleaners wore off the shiny top glaze. Either way, spraying a fresh modern bright white finish instantly updates your whole space.
Over time, dropping hard shampoo bottles creates dangerous sharp chips in cast iron. Water hits the bare metal underneath and creates rusty red stains overnight. Fortunately, filling those spots and sealing them stops rust dead in its tracks.
Sometimes, fiberglass units flex too much and develop fine spiderweb hairline cracks across the bottom. Water can leak through those tiny cracks and rot out your wood subfloor underneath. Therefore, catching this early with a fresh thick acrylic coating saves you from massive structural repair bills.
Old Surface Problem -> Quick Repair Step -> Long-Lasting Result
--------------------------------------------------------------
Faded/Ugly Color -> Complete Respray -> Bright Modern Look
Rusting Metal -> Sand & Seal Rust -> Smooth Clean Finish
Hairline Cracks -> Flex Fill & Coat -> Watertight Security
`
Moreover, old porous surfaces grab onto dirt and soap scum like a magnet. You spend hours scrubbing on your hands and knees with zero good results. Happily, a non-porous smooth layer lets dirt wash right down the drain with minimal effort.
Living near the ocean side brings lots of salty air and moisture into local homes. In places like ZIP codes 97439, high humidity makes standard paint peel off super fast. That is why our special waterproof resin bonding process works so well for coastal weather.
Many properties in this lovely city of 8,815 residents feature mid-century architecture with classic built-in fixtures. Instead of destroying original charm, local owners love preserving their home history with high-gloss restoration coatings. With a median household income sitting around $40,833, finding budget-friendly home improvements remains super important for smart shoppers.
`
Also, wet weather means people take lots of warm relaxing baths after chilly coastal walks. A smooth, sealed surface keeps washroom water warm longer for ultimate cozy bath times. Plus, it gives your private washroom that high-end resort feel without spending your whole savings account.
Right after the job gets done, you must let the fresh coating cure completely. Avoid using the water tap for at least twenty-four full hours. This gives the chemical bonds time to harden into an indestructible shield.
To keep that incredible shine going strong, ditch all abrasive scrubbing powders and rough pads. Harsh chemicals like pure bleach burn right through high-gloss topcoat layers over time. Instead, stick with mild liquid dish soap or non-abrasive foam sprays for gentle cleaning.
Additionally, avoid leaving wet bath mats lying flat on the floor of the basin permanently. Trapped water under rubber suction cups weakens the finish after several months of neglect. So, simply hang your mat up to dry after every bath to protect your hard coating.
Fixing leaky water faucets promptly also keeps the surface looking brand new for many years. Constant dripping water slowly cuts grooves into glaze layers over extended periods... So, swapping out old worn faucet washers keeps your resurfaced basin looking flawless.
First, a friendly local professional comes out to look closely at your existing fixture condition. We check for hidden rust pockets, deep structural flex cracks, or old failing paint layers. Then, we measure everything to give you an exact price down to the penny.
No hidden fees or surprise upcharges ever get tacked onto your final repair bill. You get a clear written quote detailing all the labor, prep work, and premium materials needed. This transparent approach takes all the stressful guesswork out of your home renovation planning.
Besides, taking this step costs you absolutely zero money or obligation to buy anything. You can ask all the crazy questions you want about color choices, work timelines, and care tips. We love helping local homeowners figure out the smartest choice for their personal budget.
So, why keep staring at that stained, chipped, or outdated washing unit another single day? Getting a smooth, dazzling bright finish takes just a short visit from our skilled crew. Grab your free quote today and start loving your refreshed home washroom space again!
Three quiet stages carry the whole result. They are also the ones nobody sees in the after photo.
Stage 1 of 3
A reglaze fails or lasts on what happens before the gun comes out. The old surface gets scrubbed of soap film and silicone, etched or primed so the new material has something to grip, then wet sanded until it feels like fine paper. Skip any of that and the prettiest coat in the world lets go within a year, which is exactly the story most peeling tubs tell us.
Stage 2 of 3
Chips, rust blooms and worn drain rings are ground back to sound material and rebuilt with polyester filler, then sanded flush until a fingertip cannot find the spot. Coating over damage only photographs well on day one; a repair you cannot feel is what keeps the finish honest for years.
Stage 3 of 3
The topcoat goes on in fine sprayed passes with an extractor pulling air out the window the whole time. Sprayed layers flow together into one even skin, which is why the result reads as gloss rather than as paint. Brushes and rollers leave the texture that gives cheap refinishing its reputation.
Three real ways out of a worn tub. We only do the first one, so the other two columns are simply what we would tell a friend.
| The question | Reglazing in place | Acrylic liner | Full replacement |
|---|---|---|---|
| What a standard tub costs | $350 to $800 | $1,600 to $4,000 | $3,000 to $10,000 once walls and plumbing join in |
| Bathroom out of action | One day, then the cure | Weeks of lead time, then a fitting day | One to two weeks of trades |
| Demolition involved | None at all | None, but the old tub is sealed inside | Walls opened, floor patched, debris hauled |
| Honest life expectancy | Five years and up when cared for | Long, unless water creeps between the shells | Decades |
| Watch out for | Prep shortcuts by cut-rate crews | A spongy feel and hidden moisture | The budget doubling mid-project |
If your tub is cracked through, actively leaking underneath, or you simply want a different fixture, reglazing is the wrong tool, a verdict you will hear on the very first call.
Pass 1
Soap scum, silicone and old wax stripped, then the surface etched or bonded so the coating can bite.
Pass 2
Every ding ground out, filled and sanded flush. The repairs disappear under the coating instead of through it.
Pass 3
Tile, faucet, floor and glass papered off. Overspray lands on masking paper, never on grout or chrome.
Pass 4
Primer, then gloss coats laid on in thin passes until the surface reads as one poured skin.
Pass 5
The finish hardens on its own clock, 24 to 48 hours. We tape the door and leave the tub in peace.
Pass 6
Old caulk goes out with the old finish. A new mildew-resistant bead seals tub to tile on the way out.
A reglazed tub is your old tub wearing a professional coating. That is a fine thing to be, as long as everyone knows it going in.
A sprayed acrylic urethane skin, bonded to prepared porcelain, steel or fiberglass. It is smooth, glossy, warm to the touch and fully waterproof. Done properly it gives five years and more of daily service, and plenty of our tubs sail well past that with nothing but gentle cleaning.
It is not factory enamel fired onto iron at kiln temperatures, and no honest refinisher will tell you otherwise. It can be scratched by grit, dulled by harsh powders and lifted by standing water in a spot where caulk has failed. It is a durable coating, not a new tub, and it is priced like one.
Two minutes
ZIP, what the tub is made of, what bothers you about it. Said out loud it goes faster than typing, and a photo can follow later if the case is odd.
The same call
The technician who would do the work asks his questions and names a firm figure for a standard job, then confirms it in writing before any van is booked.
You set the date
One van, one technician, drop cloths from the front door to the bathroom. Water off for nothing; only the tub is out of service.
Most of that day
Damage filled and sanded, the room masked, extractor running, then the primer and gloss coats go on in thin, even passes.
24 to 48 hours
The finish hardens untouched, the new caulk bead goes in, and you run the first bath knowing exactly what was done and what to expect of it.
| What we quote | Typical range | Reading the number |
|---|---|---|
| Standard bathtub, reglazed complete | $350 - $800 | Clean, etch, repairs, sprayed gloss and fresh caulk. |
| Chip or rust repair alone | $150 - $300 | When the finish is sound and only one wound needs closing. |
| Clawfoot tub, inside and out | $700 - $1,300 | Two surfaces, more masking, and paint-grade feet if you wish. |
| Shower pan or base | $300 - $550 | Same process on the floor you stand on every morning. |
| Caulk renewal with the job | $90 - $180 | Old bead cut out, mildew-resistant line laid in. |
| Small job minimum | around $250 | The van, the materials and the cure time exist even for tiny work. |
Heavy previous coatings that must be stripped, unusual colors and badly pitted iron push a job toward the top of its bracket. The written price reaches you before the van is even loaded, and it holds.
Ventilation is not a courtesy, it is part of the job. The extractor runs from the first solvent wipe to the last sprayed pass, pulling air out the window instead of through your hallway, and the technician wears supplied air even when the household has gone out for the day. By the evening the bathroom smells like a bathroom again.
The materials are the professional two-part systems made for this trade, mixed fresh on site, never the single-can kits sold next to the paint rollers. It is the difference between a finish that cures into a hard skin and one that stays soft enough to peel at the drain within a season, and it is most of the reason our work carries a written workmanship promise against peeling and loss of adhesion.
And the schedule respects the cure. We tell you in writing when the tub goes back into service, 24 hours for most jobs and 48 for the cautious ones, because handing a family a beautiful surface and letting them ruin it that same night helps nobody. If anything in our workmanship lets go early, the technician comes back and makes it right without a discussion about whose fault the water was.
Strong while spraying, gone surprisingly fast. The extractor vents the room to the outside for the whole job around Florence, so the rest of the home stays livable, and by the next morning the odor has left with the fumes. Pregnant households and bird owners get the frank version of this talk before booking.
Between 24 and 48 hours after the final coat, and the exact time is written on the paperwork you keep. The first bath is not a gamble; it is a date.
Any color. The most common request is retiring an avocado, pink or almond tub to white, and the coating is tinted before it is sprayed, so the new color is in the material rather than painted over it.
Yes. The prep changes, the primer changes, the result reads the same. Fiberglass with soft, flexing spots gets extra reinforcement talk first, because coating a moving floor is how warranties die.
Now the old coating comes fully off, which is honest work we price plainly, and then the job proceeds as if the tub had never been touched. Peeling almost always means the first crew skipped the etch or sprayed over silicone, not that your tub rejects coatings.
Five years is the floor we are comfortable promising out loud, not the ceiling. With soft cleaners, no standing mats and caulk kept sound, these finishes routinely serve a decade. What we refuse to do is whisper twenty and hope you lose our number.
Zoom for the lay of the land; the link lists further down name every community the van reaches from here.
The technician who picks up when you call works these streets, so the ledger below is home turf rather than trivia.
Somewhere under that worn surface is the tub you chose. One day brings it back.
Call (866) 951-0558