A dull or chipped tub in Hunter does not need a demolition crew. It needs one technician, one day and a sprayed finish that shines.
One number reaches the technician who would hold the gun. The figure comes on the call, not after a visit.
(866) 951-0558The voice on the line belongs to the trade, not to a switchboard reading a script. Two minutes of plain description are enough to price a standard tub.
You probably stare at that stained, peeling basin in your bathroom every single morning. It looks old and tired, which makes your entire room feel outdated and honestly a bit gross.
Luckily, you can fix this without tearing everything out and spending a small fortune on a full renovation. My crew and I specialize in making these tired surfaces look brand new again in Hunter, Tennessee.
Many folks think they have to replace their heavy cast iron or fiberglass tubs when they get ugly. However, you can save tons of money by choosing to resurface the existing material instead of replacing it.
When you decide to restore the finish, you stop the process of decay and prevent further damage to the structure. This smart choice gives you a clean surface that feels smooth and looks beautiful again.
Because your local area in Carter County has a history of sturdy homes, you likely have a classic unit worth saving. Replacing a tub involves demo, plumbing headaches, and expensive tiles that often get broken during removal.
Instead, a fresh coat of high-grade specialized coating provides a durable barrier against moisture and wear. This process takes much less time than a full remodel, meaning you get your bathroom back quickly.
The median household income around here is about $41,500, so saving cash is usually the top priority for homeowners. You get a high-end result that mimics the look of a brand new fixture for a fraction of the cost.
You might wonder how a new layer stays stuck to an old, slippery basin for so many years. The secret lies in the preparation, which is the most critical part of the entire operation.
First, we scrub away soap scum, hard water deposits, and oils that have lived on that surface for decades. Then, we use a special bonding agent that creates a chemical link between the old material and the new coat.
After that, we spray on the finish using professional equipment that ensures an even, glass-like result. This gives you a surface that resists mold and mildew better than the original factory finish ever could.
Think of it like getting a professional paint job on a classic car. When you treat the surface with care and use the right materials, the outcome looks stunning and remains sturdy for a long time.
That gives you a firm number to plan around, with nothing owed until you approve. You deal with one person who comes to your house, assesses the damage, and handles the fix.
Most of our neighbors in this beautiful part of the state appreciate the direct and honest approach we bring to work. You don't have to worry about hidden fees or fancy talk because we focus on the job at hand.
You deserve to know what happens when you book an appointment with a local pro. First, we remove all the caulk around the edge to ensure the seal stays tight and keeps water from leaking behind the walls.
Next, we sand down the surface to provide a rough texture that helps the coating stick permanently. Then, we use a powerful ventilation system to clear out any fumes so your home stays safe during the job.
Finally, we apply the finish in several thin layers to build up a strong and glossy protective shell. After it dries, you get a fixture that feels solid, looks bright, and creates a sense of luxury in your private space.
You can start using the bathroom again within a day or two depending on the ventilation. This speed is a huge advantage over waiting for shipping delays on new tubs that might not even fit correctly.
You might see kits at the local store that promise a quick fix for a very low price. However, those products rarely last more than a few months before they start peeling off in ugly strips.
Professional grade resins are chemically different from the stuff you buy off a shelf. When you use the right tools and professional chemicals, the bond is much tighter and the surface is harder.
Trying to do this yourself often leads to drips, bubbles, and a finish that looks worse than when you started. Why take that risk when you can have a pro do it right the first time?
Save your weekend for something more fun than scrubbing chemicals in a tight space. You have better things to do than worry about fumes and uneven application in your bathroom.
You might be curious about the cost, and the best way to find out is to request a free estimate. We visit your house, look at the condition of your fixture, and give you a clear price.
There is no pressure to buy anything, and you get all the facts you need to make the right choice. Our goal is to help you improve your living situation without breaking the bank.
Since we serve the residents of this region, we take pride in doing honest work for our neighbors. You deserve a bathroom that feels welcoming and clean every time you step inside.
We arrive on time and treat your home with the respect you expect from a local business. You show us the fixture, we measure the area, and we explain exactly how we fix the imperfections.
You can ask us any questions about the materials or the timeline for the project. We want you to feel comfortable with the plan before we even start mixing the first drop of resin.
It is really that simple to get a beautiful update for your home. You just reach out, we set up a time, and we handle the hard work while you enjoy the results.
Your home is your sanctuary, and the bathroom plays a big part in how you feel throughout the day. A stained, rough, or peeling basin ruins the vibe of your mornings.
Fixing this problem is one of the most effective ways to boost the quality of your house. You turn a source of frustration into a beautiful feature that you can be proud to show off.
Don't let another year go by dealing with a fixture that makes you unhappy. Take the first step by getting an estimate and see how much better your bathroom could look.
You will be amazed at the difference a smooth and shiny surface makes in the overall layout. It is a smart, fast, and cost-effective way to get the results you really want.
Remember that we are here to serve you, and we love helping residents in this part of the state. Your satisfaction is the main goal, and we stand by the quality of every job we finish.
Reach out today to discuss your project and learn more about how we can help you. You have everything to gain and nothing to lose by asking for a free quote.
It is time to make your home better, one bathroom fixture at a time. We look forward to working with you and making your bathroom look spectacular again.
Three quiet stages carry the whole result. They are also the ones nobody sees in the after photo.
Stage 1 of 3
A reglaze fails or lasts on what happens before the gun comes out. The old surface gets scrubbed of soap film and silicone, etched or primed so the new material has something to grip, then wet sanded until it feels like fine paper. Skip any of that and the prettiest coat in the world lets go within a year, which is exactly the story most peeling tubs tell us.
Stage 2 of 3
Chips, rust blooms and worn drain rings are ground back to sound material and rebuilt with polyester filler, then sanded flush until a fingertip cannot find the spot. Coating over damage only photographs well on day one; a repair you cannot feel is what keeps the finish honest for years.
Stage 3 of 3
The topcoat goes on in fine sprayed passes with an extractor pulling air out the window the whole time. Sprayed layers flow together into one even skin, which is why the result reads as gloss rather than as paint. Brushes and rollers leave the texture that gives cheap refinishing its reputation.
Three real ways out of a worn tub. We only do the first one, so the other two columns are simply what we would tell a friend.
| The question | Reglazing in place | Acrylic liner | Full replacement |
|---|---|---|---|
| What a standard tub costs | $350 to $800 | $1,600 to $4,000 | $3,000 to $10,000 once walls and plumbing join in |
| Bathroom out of action | One day, then the cure | Weeks of lead time, then a fitting day | One to two weeks of trades |
| Demolition involved | None at all | None, but the old tub is sealed inside | Walls opened, floor patched, debris hauled |
| Honest life expectancy | Five years and up when cared for | Long, unless water creeps between the shells | Decades |
| Watch out for | Prep shortcuts by cut-rate crews | A spongy feel and hidden moisture | The budget doubling mid-project |
If your tub is cracked through, actively leaking underneath, or you simply want a different fixture, reglazing is the wrong tool, a verdict you will hear on the very first call.
Pass 1
Soap scum, silicone and old wax stripped, then the surface etched or bonded so the coating can bite.
Pass 2
Every ding ground out, filled and sanded flush. The repairs disappear under the coating instead of through it.
Pass 3
Tile, faucet, floor and glass papered off. Overspray lands on masking paper, never on grout or chrome.
Pass 4
Primer, then gloss coats laid on in thin passes until the surface reads as one poured skin.
Pass 5
The finish hardens on its own clock, 24 to 48 hours. We tape the door and leave the tub in peace.
Pass 6
Old caulk goes out with the old finish. A new mildew-resistant bead seals tub to tile on the way out.
A reglazed tub is your old tub wearing a professional coating. That is a fine thing to be, as long as everyone knows it going in.
A sprayed acrylic urethane skin, bonded to prepared porcelain, steel or fiberglass. It is smooth, glossy, warm to the touch and fully waterproof. Done properly it gives five years and more of daily service, and plenty of our tubs sail well past that with nothing but gentle cleaning.
It is not factory enamel fired onto iron at kiln temperatures, and no honest refinisher will tell you otherwise. It can be scratched by grit, dulled by harsh powders and lifted by standing water in a spot where caulk has failed. It is a durable coating, not a new tub, and it is priced like one.
Two minutes
ZIP, what the tub is made of, what bothers you about it. Said out loud it goes faster than typing, and a photo can follow later if the case is odd.
The same call
The technician who would do the work asks his questions and names a firm figure for a standard job, then confirms it in writing before any van is booked.
You set the date
One van, one technician, drop cloths from the front door to the bathroom. Water off for nothing; only the tub is out of service.
Most of that day
Damage filled and sanded, the room masked, extractor running, then the primer and gloss coats go on in thin, even passes.
24 to 48 hours
The finish hardens untouched, the new caulk bead goes in, and you run the first bath knowing exactly what was done and what to expect of it.
| What we quote | Typical range | Reading the number |
|---|---|---|
| Standard bathtub, reglazed complete | $350 - $800 | Clean, etch, repairs, sprayed gloss and fresh caulk. |
| Chip or rust repair alone | $150 - $300 | When the finish is sound and only one wound needs closing. |
| Clawfoot tub, inside and out | $700 - $1,300 | Two surfaces, more masking, and paint-grade feet if you wish. |
| Shower pan or base | $300 - $550 | Same process on the floor you stand on every morning. |
| Caulk renewal with the job | $90 - $180 | Old bead cut out, mildew-resistant line laid in. |
| Small job minimum | around $250 | The van, the materials and the cure time exist even for tiny work. |
Heavy previous coatings that must be stripped, unusual colors and badly pitted iron push a job toward the top of its bracket. The written price reaches you before the van is even loaded, and it holds.
Ventilation is not a courtesy, it is part of the job. The extractor runs from the first solvent wipe to the last sprayed pass, pulling air out the window instead of through your hallway, and the technician wears supplied air even when the household has gone out for the day. By the evening the bathroom smells like a bathroom again.
The materials are the professional two-part systems made for this trade, mixed fresh on site, never the single-can kits sold next to the paint rollers. It is the difference between a finish that cures into a hard skin and one that stays soft enough to peel at the drain within a season, and it is most of the reason our work carries a written workmanship promise against peeling and loss of adhesion.
And the schedule respects the cure. We tell you in writing when the tub goes back into service, 24 hours for most jobs and 48 for the cautious ones, because handing a family a beautiful surface and letting them ruin it that same night helps nobody. If anything in our workmanship lets go early, the technician comes back and makes it right without a discussion about whose fault the water was.
Strong while spraying, gone surprisingly fast. The extractor vents the room to the outside for the whole job around Hunter, so the rest of the home stays livable, and by the next morning the odor has left with the fumes. Pregnant households and bird owners get the frank version of this talk before booking.
Between 24 and 48 hours after the final coat, and the exact time is written on the paperwork you keep. The first bath is not a gamble; it is a date.
Any color. The most common request is retiring an avocado, pink or almond tub to white, and the coating is tinted before it is sprayed, so the new color is in the material rather than painted over it.
Yes. The prep changes, the primer changes, the result reads the same. Fiberglass with soft, flexing spots gets extra reinforcement talk first, because coating a moving floor is how warranties die.
Now the old coating comes fully off, which is honest work we price plainly, and then the job proceeds as if the tub had never been touched. Peeling almost always means the first crew skipped the etch or sprayed over silicone, not that your tub rejects coatings.
Five years is the floor we are comfortable promising out loud, not the ceiling. With soft cleaners, no standing mats and caulk kept sound, these finishes routinely serve a decade. What we refuse to do is whisper twenty and hope you lose our number.
Zoom for the lay of the land; the link lists further down name every community the van reaches from here.
The technician who picks up when you call works these streets, so the ledger below is home turf rather than trivia.
Somewhere under that worn surface is the tub you chose. One day brings it back.
Call (866) 951-0558