A dull or chipped tub in Jackson does not need a demolition crew. It needs one technician, one day and a sprayed finish that shines.
One number reaches the technician who would hold the gun. The figure comes on the call, not after a visit.
(866) 951-0558The voice on the line belongs to the trade, not to a switchboard reading a script. Two minutes of plain description are enough to price a standard tub.
You can completely transform your old bathroom without spending a fortune on a messy demolition.
Our professional surface renewal process makes your worn out tub look shiny and fresh again in just a few hours.
Get your free estimate right now and see how easy it is to upgrade your home.
Living with a stained or outdated bathing fixture can really ruin your morning routine.
Many homeowners think they have to tear out their entire setup just to get rid of ugly scratches or an old color.
That is why our specialized surface restoration service offers a smart alternative that saves you time and money.
Instead of hiring plumbers and paying for expensive replacement fixtures, we apply a high-performance coating that bonds directly to your existing structure.
This means you get a sparkling clean finish that looks identical to a brand new installation.
Plus, you avoid the noisy construction dust that usually takes over your house during a standard remodel.
First, we clean the area thoroughly using industrial-strength prep agents to remove any soap scum and mineral deposits.
This step is crucial because the new coating needs a perfectly clean foundation to stick to.
If we find any deep chips or cracks, we patch them up carefully so the final result is completely smooth.
Next, our technicians apply a strong bonding agent that locks the new layers to the original porcelain or fiberglass.
We use professional spray equipment to apply multiple coats of our premium acrylic urethane.
This careful process ensures a highly durable shield that resists chipping and peeling for years to come.
Finally, we let the new coating cure properly before we put on the finishing touches.
Once the job is done, your washroom will have a beautiful shine that makes cleaning so much easier.
You will love how the light bounces off the refreshed material every time you walk into the room.
When you choose our specialized recoating process, you keep a perfectly good fixture out of the local landfill.
This eco-friendly decision reduces waste while keeping your hard-earned money in your wallet.
Actually, we can complete the entire job in a single day, which means you can use your shower again very quickly.
To help you compare your options, we created a handy table that shows the differences between our process and a full replacement.
| Factor | Our Coating Process | Full Bathroom Demolition |
|---|---|---|
| Total Cost | Very affordable and budget-friendly | Extremely high with plumbing fees |
| Project Time | Completed in less than 24 hours | Can take several days or even weeks |
| Mess Level | Minimal dust and very little cleanup | Heavy construction debris and noise |
As you can see, our process is designed to keep your life simple and stress-free.
We focus on delivering high-quality results without the typical headaches of home improvement.
This lets you enjoy a clean, modern space without any of the usual renovation drama.
We take great pride in serving our wonderful community here in Washington County.
Our neighbors in this charming Wisconsin town of 7,020 people appreciate honest work and fair prices.
Whether you live near the local parks or closer to the main highway, we are always ready to help you improve your home.
With a median household income of $69,756, we know that local families want to spend their money wisely.
That is why we offer a durable solution that extends the life of your current bathroom fixtures for a fraction of the cost.
We treat every home in the 53037 ZIP code as if it were our own, paying close attention to every single detail.
Our friendly team always arrives on time and cleans up the workspace before we leave.
We understand that having workers in your house can be stressful, so we make sure the process is as quiet and fast as possible...
You can trust us to deliver a gorgeous finish that will make your guests ask if you bought a brand new tub.
Yes, we definitely can repair most surface damage before we apply the new coating. We use special waterproof fillers to patch up deep holes, chips, and rusty areas so they disappear completely. This preparation work ensures that the final finish is perfectly level and stays strong for years.
With proper care and non-abrasive cleaning products, your newly coated surface can easily last ten to fifteen years. We always recommend using gentle liquid cleaners and soft sponges instead of harsh scrubbing powders. This simple maintenance routine preserves the brilliant shine and keeps your bathroom looking fantastic.
There is a noticeable smell while we spray the material, but we use powerful ventilation fans to pull the fumes outside. The odor dissipates very quickly once we finish our work and the coating begins to cure. By the next day, your home will smell fresh again, and you will be ready to enjoy your beautiful space.
Are you ready to say goodbye to that ugly, hard-to-clean bathtub once and for all?
We make it incredibly easy to get started by offering a completely free, no-obligation quote for your project.
Our team will look at your current setup, answer your questions, and give you an honest price with no hidden fees.
You do not have to live with a dingy bathroom that makes you feel embarrassed when guests visit.
Investing in our high-quality restoration service brings back the shine and freshness you deserve.
Contact us today to schedule your free estimate and take the first step toward a beautiful home upgrade.
Three quiet stages carry the whole result. They are also the ones nobody sees in the after photo.
Stage 1 of 3
A reglaze fails or lasts on what happens before the gun comes out. The old surface gets scrubbed of soap film and silicone, etched or primed so the new material has something to grip, then wet sanded until it feels like fine paper. Skip any of that and the prettiest coat in the world lets go within a year, which is exactly the story most peeling tubs tell us.
Stage 2 of 3
Chips, rust blooms and worn drain rings are ground back to sound material and rebuilt with polyester filler, then sanded flush until a fingertip cannot find the spot. Coating over damage only photographs well on day one; a repair you cannot feel is what keeps the finish honest for years.
Stage 3 of 3
The topcoat goes on in fine sprayed passes with an extractor pulling air out the window the whole time. Sprayed layers flow together into one even skin, which is why the result reads as gloss rather than as paint. Brushes and rollers leave the texture that gives cheap refinishing its reputation.
Three real ways out of a worn tub. We only do the first one, so the other two columns are simply what we would tell a friend.
| The question | Reglazing in place | Acrylic liner | Full replacement |
|---|---|---|---|
| What a standard tub costs | $350 to $800 | $1,600 to $4,000 | $3,000 to $10,000 once walls and plumbing join in |
| Bathroom out of action | One day, then the cure | Weeks of lead time, then a fitting day | One to two weeks of trades |
| Demolition involved | None at all | None, but the old tub is sealed inside | Walls opened, floor patched, debris hauled |
| Honest life expectancy | Five years and up when cared for | Long, unless water creeps between the shells | Decades |
| Watch out for | Prep shortcuts by cut-rate crews | A spongy feel and hidden moisture | The budget doubling mid-project |
If your tub is cracked through, actively leaking underneath, or you simply want a different fixture, reglazing is the wrong tool, a verdict you will hear on the very first call.
Pass 1
Soap scum, silicone and old wax stripped, then the surface etched or bonded so the coating can bite.
Pass 2
Every ding ground out, filled and sanded flush. The repairs disappear under the coating instead of through it.
Pass 3
Tile, faucet, floor and glass papered off. Overspray lands on masking paper, never on grout or chrome.
Pass 4
Primer, then gloss coats laid on in thin passes until the surface reads as one poured skin.
Pass 5
The finish hardens on its own clock, 24 to 48 hours. We tape the door and leave the tub in peace.
Pass 6
Old caulk goes out with the old finish. A new mildew-resistant bead seals tub to tile on the way out.
A reglazed tub is your old tub wearing a professional coating. That is a fine thing to be, as long as everyone knows it going in.
A sprayed acrylic urethane skin, bonded to prepared porcelain, steel or fiberglass. It is smooth, glossy, warm to the touch and fully waterproof. Done properly it gives five years and more of daily service, and plenty of our tubs sail well past that with nothing but gentle cleaning.
It is not factory enamel fired onto iron at kiln temperatures, and no honest refinisher will tell you otherwise. It can be scratched by grit, dulled by harsh powders and lifted by standing water in a spot where caulk has failed. It is a durable coating, not a new tub, and it is priced like one.
Two minutes
ZIP, what the tub is made of, what bothers you about it. Said out loud it goes faster than typing, and a photo can follow later if the case is odd.
The same call
The technician who would do the work asks his questions and names a firm figure for a standard job, then confirms it in writing before any van is booked.
You set the date
One van, one technician, drop cloths from the front door to the bathroom. Water off for nothing; only the tub is out of service.
Most of that day
Damage filled and sanded, the room masked, extractor running, then the primer and gloss coats go on in thin, even passes.
24 to 48 hours
The finish hardens untouched, the new caulk bead goes in, and you run the first bath knowing exactly what was done and what to expect of it.
| What we quote | Typical range | Reading the number |
|---|---|---|
| Standard bathtub, reglazed complete | $350 - $800 | Clean, etch, repairs, sprayed gloss and fresh caulk. |
| Chip or rust repair alone | $150 - $300 | When the finish is sound and only one wound needs closing. |
| Clawfoot tub, inside and out | $700 - $1,300 | Two surfaces, more masking, and paint-grade feet if you wish. |
| Shower pan or base | $300 - $550 | Same process on the floor you stand on every morning. |
| Caulk renewal with the job | $90 - $180 | Old bead cut out, mildew-resistant line laid in. |
| Small job minimum | around $250 | The van, the materials and the cure time exist even for tiny work. |
Heavy previous coatings that must be stripped, unusual colors and badly pitted iron push a job toward the top of its bracket. The written price reaches you before the van is even loaded, and it holds.
Ventilation is not a courtesy, it is part of the job. The extractor runs from the first solvent wipe to the last sprayed pass, pulling air out the window instead of through your hallway, and the technician wears supplied air even when the household has gone out for the day. By the evening the bathroom smells like a bathroom again.
The materials are the professional two-part systems made for this trade, mixed fresh on site, never the single-can kits sold next to the paint rollers. It is the difference between a finish that cures into a hard skin and one that stays soft enough to peel at the drain within a season, and it is most of the reason our work carries a written workmanship promise against peeling and loss of adhesion.
And the schedule respects the cure. We tell you in writing when the tub goes back into service, 24 hours for most jobs and 48 for the cautious ones, because handing a family a beautiful surface and letting them ruin it that same night helps nobody. If anything in our workmanship lets go early, the technician comes back and makes it right without a discussion about whose fault the water was.
Strong while spraying, gone surprisingly fast. The extractor vents the room to the outside for the whole job around Jackson, so the rest of the home stays livable, and by the next morning the odor has left with the fumes. Pregnant households and bird owners get the frank version of this talk before booking.
Between 24 and 48 hours after the final coat, and the exact time is written on the paperwork you keep. The first bath is not a gamble; it is a date.
Any color. The most common request is retiring an avocado, pink or almond tub to white, and the coating is tinted before it is sprayed, so the new color is in the material rather than painted over it.
Yes. The prep changes, the primer changes, the result reads the same. Fiberglass with soft, flexing spots gets extra reinforcement talk first, because coating a moving floor is how warranties die.
Now the old coating comes fully off, which is honest work we price plainly, and then the job proceeds as if the tub had never been touched. Peeling almost always means the first crew skipped the etch or sprayed over silicone, not that your tub rejects coatings.
Five years is the floor we are comfortable promising out loud, not the ceiling. With soft cleaners, no standing mats and caulk kept sound, these finishes routinely serve a decade. What we refuse to do is whisper twenty and hope you lose our number.
Zoom for the lay of the land; the link lists further down name every community the van reaches from here.
The technician who picks up when you call works these streets, so the ledger below is home turf rather than trivia.
Somewhere under that worn surface is the tub you chose. One day brings it back.
Call (866) 951-0558