All over Jefferson Davis County, worn bathtubs are resurfaced in place: repairs first, gloss second, fresh caulk on the way out.
One number reaches the technician who would hold the gun. The figure comes on the call, not after a visit.
(866) 951-0558The voice on the line belongs to the trade, not to a switchboard reading a script. Two minutes of plain description are enough to price a standard tub.
Are you tired of looking at those scratched and stained surfaces in your bathroom? A simple makeover can save you thousands compared to a full demolition project.
Many people think the only way to fix a gross old tub is to rip it out. This involves heavy labor and messy plumbing work. Instead you can choose a smart alternative that fixes the surface. This saves you so much time and massive amounts of cash.
Imagine you just bought a house in Jefferson Davis County, Mississippi. You find that the bathroom looks like it survived a war from the seventies. You probably want a fresh look right away. Most folks assume they must tear everything apart to get there.
However you could just keep the existing structure and make it look brand new. This method uses special resins to coat the material. It creates a smooth finish that feels soft to the touch. You gain a beautiful space without all the construction dust.
Professional workers apply a high-tech layer over your old porcelain or fiberglass. This process seals up all those nasty cracks where mold loves to hide. You get a hygienic surface that stays clean much easier than before. It really brings a sense of serenity to your morning routine.
Think about how much effort it takes to scrub a porous surface. The grit just stays trapped inside the tiny pits of the material. By applying a smooth protective coating you create a shield against grime. Now you spend way less time cleaning and more time relaxing.
On top of that this process is incredibly quick to finish. You do not need to wait weeks for cabinets or tiles to arrive. Usually the work takes less than a day to complete properly. You can use your bathroom again very soon after the finish cures.
| Method | Estimated Cost | Time Required | Mess Level | |
|---|---|---|---|---|
| Full Replacement | Extremely High | Weeks | Very High | |
| Surface Coating | Very Affordable | One Day | Low | |
| DIY Painting | Low | Days | High Risk |
Actually, trying to do this yourself with kits from a hardware store often fails. People usually end up with drips and uneven patches that peel off later. You deserve a professional application that lasts for many years to come. This provides genuine tranquility for your home investment.
When you look for someone to help, you should check their experience. Ask them how long they have been working on these specific surfaces. A pro will know exactly which chemicals work best for your unique tub. They also bring all the proper ventilation tools to keep your house safe.
Perhaps you worry about the smell of the materials during the process. Skilled workers use high-powered exhaust fans to vent those fumes outside. This keeps the rest of your home feeling fresh and airy. It is a very thoughtful way to handle the renovation.
Furthermore you should look for someone who offers a clear guarantee. If the surface starts to peel within a year, they should fix it. This gives you total peace of mind regarding your hard-earned money. You really should not settle for anything less than excellence.
Our area, located in the beautiful state of Mississippi, has a unique charm. Even in places where the population is sparse or the ZIP codes like 39421 and 39427 represent specific zones, we serve everyone. You might live in a rural spot where finding a contractor is tough. We make it our priority to reach you wherever you are.
Because the median household income varies across the region, we provide flexible options. You do not need to be wealthy to afford a beautiful bathroom update. Everyone deserves a space that feels like a sanctuary of sorts. We work hard to stay budget-friendly for all our neighbors.
By focusing on our local community, we build long-lasting relationships. You are not just a customer to us, you are a neighbor. If you have questions about the process, we take the time to answer them. We want you to feel totally confident before we start any work.
First the crew arrives and masks off all the surrounding areas. This protects your tiles and floor from any overspray. Next they deep clean the surface to remove every speck of soap scum. If they do not do this right, the new layer will not stick.
After cleaning, they fix any chips or deep gouges in the bottom. They use a special filler that dries rock hard and flat. This makes the surface look perfectly level once again. You will hardly notice where the damage used to be.
Then comes the application of the primer and the top coat. The workers use a fine spray gun to ensure an even look. It creates a smooth, glossy, or matte finish depending on your choice. This adds a sense of refinement to your entire room.
Now that you have a beautiful tub, you need to keep it nice. Avoid using harsh abrasive cleaners that could scratch the new layer. Instead stick to mild soap and a soft microfiber cloth. This keeps the finish looking bright and healthy for a long time.
Do not use suction cup mats that have sharp edges on the bottom. These can eventually break the seal of your new coating. Use a rubber mat that is smooth or a simple towel instead. Small changes in habit go a long way for durability.
Also make sure you fix any leaky faucets as soon as possible. Constant dripping water can cause mineral deposits to build up. If you wipe down the surface after each use, it stays cleaner. This simple act keeps it feeling fresh and clean for years.
Getting started is actually quite simple and takes very little effort. You just need to reach out and ask for an estimate. We come to your home and take a look at the current state. There is no pressure to commit if you are not ready.
We provide a written breakdown of the costs involved with the project. You see exactly what you are paying for from the start. Transparency is the bedrock of how we operate with all our clients. You deserve to know everything before you make a choice.
Once you see the cost compared to the price of a new tub, it becomes a no-brainer. You will save thousands while achieving the exact same visual result. Go ahead and take the first step toward a beautiful bathroom upgrade. You will be glad you did when you see the final result.
Many folks wonder if the new finish will chip or peel away quickly. When applied correctly by a pro, it bonds extremely well to the surface. It is designed to handle daily use and hot water temperatures. You can trust the process when you use the right materials.
Another common question is about the color options available to you. You are not stuck with boring white if you want something else. We can match many shades to fit your bathroom decor perfectly. This allows you to customize the space to your specific taste.
Finally you might wonder if this works on old cast iron tubs. It absolutely does, and it often works even better than on plastic. Those old tubs are heavy and built to last for decades. Giving them a new coating is the best way to respect their history.
You spend a lot of time in your bathroom every single day. Making it a place that you love makes a huge difference. You feel better when your surroundings look clean and cared for. This is a small project with a huge impact on your mood.
Why wait another year looking at those ugly stains? You have the power to change your home for the better. Send in your request for a free price estimate right now. We are ready to help you transform your space into something amazing.
Everything is set for you to move forward with this project. You do not have to worry about the heavy lifting or the mess. Let the professionals handle the difficult parts while you enjoy the result. It is time to treat yourself to the bathroom you deserve.
Three quiet stages carry the whole result. They are also the ones nobody sees in the after photo.
Stage 1 of 3
A reglaze fails or lasts on what happens before the gun comes out. The old surface gets scrubbed of soap film and silicone, etched or primed so the new material has something to grip, then wet sanded until it feels like fine paper. Skip any of that and the prettiest coat in the world lets go within a year, which is exactly the story most peeling tubs tell us.
Stage 2 of 3
Chips, rust blooms and worn drain rings are ground back to sound material and rebuilt with polyester filler, then sanded flush until a fingertip cannot find the spot. Coating over damage only photographs well on day one; a repair you cannot feel is what keeps the finish honest for years.
Stage 3 of 3
The topcoat goes on in fine sprayed passes with an extractor pulling air out the window the whole time. Sprayed layers flow together into one even skin, which is why the result reads as gloss rather than as paint. Brushes and rollers leave the texture that gives cheap refinishing its reputation.
Three real ways out of a worn tub. We only do the first one, so the other two columns are simply what we would tell a friend.
| The question | Reglazing in place | Acrylic liner | Full replacement |
|---|---|---|---|
| What a standard tub costs | $350 to $800 | $1,600 to $4,000 | $3,000 to $10,000 once walls and plumbing join in |
| Bathroom out of action | One day, then the cure | Weeks of lead time, then a fitting day | One to two weeks of trades |
| Demolition involved | None at all | None, but the old tub is sealed inside | Walls opened, floor patched, debris hauled |
| Honest life expectancy | Five years and up when cared for | Long, unless water creeps between the shells | Decades |
| Watch out for | Prep shortcuts by cut-rate crews | A spongy feel and hidden moisture | The budget doubling mid-project |
If your tub is cracked through, actively leaking underneath, or you simply want a different fixture, reglazing is the wrong tool, a verdict you will hear on the very first call.
Pass 1
Soap scum, silicone and old wax stripped, then the surface etched or bonded so the coating can bite.
Pass 2
Every ding ground out, filled and sanded flush. The repairs disappear under the coating instead of through it.
Pass 3
Tile, faucet, floor and glass papered off. Overspray lands on masking paper, never on grout or chrome.
Pass 4
Primer, then gloss coats laid on in thin passes until the surface reads as one poured skin.
Pass 5
The finish hardens on its own clock, 24 to 48 hours. We tape the door and leave the tub in peace.
Pass 6
Old caulk goes out with the old finish. A new mildew-resistant bead seals tub to tile on the way out.
A reglazed tub is your old tub wearing a professional coating. That is a fine thing to be, as long as everyone knows it going in.
A sprayed acrylic urethane skin, bonded to prepared porcelain, steel or fiberglass. It is smooth, glossy, warm to the touch and fully waterproof. Done properly it gives five years and more of daily service, and plenty of our tubs sail well past that with nothing but gentle cleaning.
It is not factory enamel fired onto iron at kiln temperatures, and no honest refinisher will tell you otherwise. It can be scratched by grit, dulled by harsh powders and lifted by standing water in a spot where caulk has failed. It is a durable coating, not a new tub, and it is priced like one.
Two minutes
ZIP, what the tub is made of, what bothers you about it. Said out loud it goes faster than typing, and a photo can follow later if the case is odd.
The same call
The technician who would do the work asks his questions and names a firm figure for a standard job, then confirms it in writing before any van is booked.
You set the date
One van, one technician, drop cloths from the front door to the bathroom. Water off for nothing; only the tub is out of service.
Most of that day
Damage filled and sanded, the room masked, extractor running, then the primer and gloss coats go on in thin, even passes.
24 to 48 hours
The finish hardens untouched, the new caulk bead goes in, and you run the first bath knowing exactly what was done and what to expect of it.
| What we quote | Typical range | Reading the number |
|---|---|---|
| Standard bathtub, reglazed complete | $350 - $800 | Clean, etch, repairs, sprayed gloss and fresh caulk. |
| Chip or rust repair alone | $150 - $300 | When the finish is sound and only one wound needs closing. |
| Clawfoot tub, inside and out | $700 - $1,300 | Two surfaces, more masking, and paint-grade feet if you wish. |
| Shower pan or base | $300 - $550 | Same process on the floor you stand on every morning. |
| Caulk renewal with the job | $90 - $180 | Old bead cut out, mildew-resistant line laid in. |
| Small job minimum | around $250 | The van, the materials and the cure time exist even for tiny work. |
Heavy previous coatings that must be stripped, unusual colors and badly pitted iron push a job toward the top of its bracket. The written price reaches you before the van is even loaded, and it holds.
Ventilation is not a courtesy, it is part of the job. The extractor runs from the first solvent wipe to the last sprayed pass, pulling air out the window instead of through your hallway, and the technician wears supplied air even when the household has gone out for the day. By the evening the bathroom smells like a bathroom again.
The materials are the professional two-part systems made for this trade, mixed fresh on site, never the single-can kits sold next to the paint rollers. It is the difference between a finish that cures into a hard skin and one that stays soft enough to peel at the drain within a season, and it is most of the reason our work carries a written workmanship promise against peeling and loss of adhesion.
And the schedule respects the cure. We tell you in writing when the tub goes back into service, 24 hours for most jobs and 48 for the cautious ones, because handing a family a beautiful surface and letting them ruin it that same night helps nobody. If anything in our workmanship lets go early, the technician comes back and makes it right without a discussion about whose fault the water was.
Strong while spraying, gone surprisingly fast. The extractor vents the room to the outside for the whole job, so the rest of the home stays livable, and by the next morning the odor has left with the fumes. Pregnant households and bird owners get the frank version of this talk before booking.
Between 24 and 48 hours after the final coat, and the exact time is written on the paperwork you keep. The first bath is not a gamble; it is a date.
Any color. The most common request is retiring an avocado, pink or almond tub to white, and the coating is tinted before it is sprayed, so the new color is in the material rather than painted over it.
Yes. The prep changes, the primer changes, the result reads the same. Fiberglass with soft, flexing spots gets extra reinforcement talk first, because coating a moving floor is how warranties die.
Now the old coating comes fully off, which is honest work we price plainly, and then the job proceeds as if the tub had never been touched. Peeling almost always means the first crew skipped the etch or sprayed over silicone, not that your tub rejects coatings.
Five years is the floor we are comfortable promising out loud, not the ceiling. With soft cleaners, no standing mats and caulk kept sound, these finishes routinely serve a decade. What we refuse to do is whisper twenty and hope you lose our number.
Zoom for the lay of the land; the link lists further down name every community the van reaches from here.
Somewhere under that worn surface is the tub you chose. One day brings it back.
Call (866) 951-0558