A dull or chipped tub in Laurium does not need a demolition crew. It needs one technician, one day and a sprayed finish that shines.
One number reaches the technician who would hold the gun. The figure comes on the call, not after a visit.
(866) 951-0558The voice on the line belongs to the trade, not to a switchboard reading a script. Two minutes of plain description are enough to price a standard tub.
You probably stare at that stained, chipped porcelain every single morning while brushing your teeth. It ruins the whole vibe of your bathroom and makes you wish you could just snap your fingers to get a brand new look.
Luckily, you have a much cheaper and faster way to transform your space without the headache of a full renovation. Getting your surfaces professionally resurfaced provides that fresh, glossy finish you crave without ripping anything out of your floorboards.
Basically, this process involves stripping away years of grime, soap scum, and ugly mineral buildup from your existing hardware. Once the surface is perfectly clean, you apply a high-tech bonding agent that sticks to the old material like glue.
After that step, you spray on a durable, industrial-grade coating that seals everything up tight. This creates a smooth, shiny barrier that feels just as good as the day the house was first built.
If you decide to rip out your old basin, you have to deal with plumbers, tile workers, and tons of dust. That gets expensive fast, especially when you consider the cost of new materials and disposal fees for the old heavy cast iron.
On the other hand, choosing a local service provider to renew your existing unit saves you thousands of dollars instantly. This leaves you with extra cash to spend on fancy new mirrors or maybe even some nice lighting fixtures instead.
Living in a place like the snowy reaches of northern Michigan means you value reliability and hard work. When you invite a professional into your home, you want someone who understands the local climate and the history of these older buildings.
With a population of around 2,179, folks in this area appreciate keeping their homes in great shape without unnecessary waste. Our neighbors deserve high-quality results that stand the test of time against our chilly winters and humid summers.
First, we set up a time that fits your schedule because your time is valuable. We arrive with all the gear needed to mask off the surrounding area so your walls and floors stay perfectly clean.
Then, we carefully remove all the old caulk and treat any cracks or chips found in the basin. This preparation stage is crucial because it ensures the new layer sticks perfectly and stays smooth for years.
| Stage | Benefit |
| Cleaning | Removes hidden bacteria |
| Repairing | Fixes structural eyesores |
| Coating | Provides lasting ease |
| Curing | Ensures rock-solid durability |
Some people think that if they paint their old basin, it will just peel off in a week. That is totally wrong because modern chemical bonding agents are lightyears ahead of simple spray paint.
Another myth is that you cannot get a specific color or finish you want for your decor. Actually, you have tons of choices, ranging from a crisp, bright white to soft off-whites that match vintage themes.
Once the work is done, you should avoid harsh scrubbing pads or abrasive chemicals that can scratch the glossy shine. Instead, just use a mild, non-abrasive liquid cleanser and a soft cloth to wipe things down regularly.
By following these simple steps, your fixture stays looking sharp and retains its pleasant feel for a very long time. It really is about being gentle with the materials so they continue to serve you well.
You might be tempted to try one of those do-it-yourself kits from the big box store. Honestly, those kits rarely last, and they often leave behind bumpy, uneven textures that look messy the moment the light hits them.
When you hire a pro, you get a uniform spray pattern that mimics a factory-baked finish. That level of quality is hard to replicate unless you have done this thousands of times like we have.
If you are ready to stop looking at that cracked, yellowing basin, you should reach out for a professional opinion today. A quick chat can reveal exactly what your project needs to go from drab to fab in just one day.
We offer a free estimate to anyone in the area who wants to see the numbers before committing. Knowing exactly what it costs helps you plan your home improvements with total peace of mind.
With a median household income of $41,979, we know that every dollar counts for families in this part of the state. Keeping your home value up while staying within your budget is the smartest way to live.
Whether you live in a historic home near the old mines or a newer construction, we treat every project with respect. Your satisfaction is the most important part of the job, and we take that very seriously.
Maybe your basin is a weird shade of avocado green from the seventies that you absolutely hate. We can change that color to a classic white that makes the whole bathroom look bigger and brighter.
Or maybe you have a deep, heavy tub that is just impossible to clean because the surface has become porous. We seal those pores permanently, which means soap scum and mildew have nowhere to hide anymore.
People often ask if the fumes are going to be overwhelming during the application. We use high-quality ventilation fans to push the air outside, keeping your home environment pleasant throughout the entire session.
Another question involves how long you have to wait before you can use the shower again. Usually, it takes just about twenty-four hours for everything to cure completely and become fully ready for your use.
Think about how much better you will feel starting your day in a space that looks crisp and clean. A nice, shiny surface makes the whole room feel more inviting, which sets a positive tone for your morning.
Plus, you will spend way less time scrubbing and more time relaxing in your upgraded space. That is a massive win for anyone who is tired of fighting with tough stains that never seem to go away.
Getting a free quote is super easy and puts absolutely no pressure on you to buy anything. You just tell us about the size and current condition of your unit, and we give you a fair price.
You deserve a home that feels like a sanctuary, even if it is just a small bathroom update. Why wait another year to fix those issues that drive you crazy every single day?
We are ready to come out to your property whenever you have a window of time. Just let us know when you are free, and we can look at your setup to provide a clear, honest estimate.
Every home in this community has its own character, and we love helping you maintain that special charm. Let us handle the messy, detailed work so you can simply enjoy the final result.
Investing in your living space is always a good move, especially when the solution is efficient and affordable. You get a high-end look without the high-end stress of a massive renovation project.
We look forward to hearing from you and helping you transform your bathroom into a space you are proud to show off. Reach out now to get the process started and see how much of a difference a fresh coat makes.
Waiting just means you keep staring at that old, dull surface for longer than you really have to. There is no reason to put up with fixtures that do not meet your standards of beauty.
Our schedule fills up fast with folks looking to spruce up their homes before the seasons change. By grabbing your spot now, you ensure that your bathroom gets the attention it needs without any delay.
We stand behind our work because we know how important your home is to you. Our goal is to leave you with a smile and a bathroom that looks completely brand new.
If you have any last questions, please ask them when you reach out for your free estimate. We are always here to help you understand every single part of the process clearly.
Three quiet stages carry the whole result. They are also the ones nobody sees in the after photo.
Stage 1 of 3
A reglaze fails or lasts on what happens before the gun comes out. The old surface gets scrubbed of soap film and silicone, etched or primed so the new material has something to grip, then wet sanded until it feels like fine paper. Skip any of that and the prettiest coat in the world lets go within a year, which is exactly the story most peeling tubs tell us.
Stage 2 of 3
Chips, rust blooms and worn drain rings are ground back to sound material and rebuilt with polyester filler, then sanded flush until a fingertip cannot find the spot. Coating over damage only photographs well on day one; a repair you cannot feel is what keeps the finish honest for years.
Stage 3 of 3
The topcoat goes on in fine sprayed passes with an extractor pulling air out the window the whole time. Sprayed layers flow together into one even skin, which is why the result reads as gloss rather than as paint. Brushes and rollers leave the texture that gives cheap refinishing its reputation.
Three real ways out of a worn tub. We only do the first one, so the other two columns are simply what we would tell a friend.
| The question | Reglazing in place | Acrylic liner | Full replacement |
|---|---|---|---|
| What a standard tub costs | $350 to $800 | $1,600 to $4,000 | $3,000 to $10,000 once walls and plumbing join in |
| Bathroom out of action | One day, then the cure | Weeks of lead time, then a fitting day | One to two weeks of trades |
| Demolition involved | None at all | None, but the old tub is sealed inside | Walls opened, floor patched, debris hauled |
| Honest life expectancy | Five years and up when cared for | Long, unless water creeps between the shells | Decades |
| Watch out for | Prep shortcuts by cut-rate crews | A spongy feel and hidden moisture | The budget doubling mid-project |
If your tub is cracked through, actively leaking underneath, or you simply want a different fixture, reglazing is the wrong tool, a verdict you will hear on the very first call.
Pass 1
Soap scum, silicone and old wax stripped, then the surface etched or bonded so the coating can bite.
Pass 2
Every ding ground out, filled and sanded flush. The repairs disappear under the coating instead of through it.
Pass 3
Tile, faucet, floor and glass papered off. Overspray lands on masking paper, never on grout or chrome.
Pass 4
Primer, then gloss coats laid on in thin passes until the surface reads as one poured skin.
Pass 5
The finish hardens on its own clock, 24 to 48 hours. We tape the door and leave the tub in peace.
Pass 6
Old caulk goes out with the old finish. A new mildew-resistant bead seals tub to tile on the way out.
A reglazed tub is your old tub wearing a professional coating. That is a fine thing to be, as long as everyone knows it going in.
A sprayed acrylic urethane skin, bonded to prepared porcelain, steel or fiberglass. It is smooth, glossy, warm to the touch and fully waterproof. Done properly it gives five years and more of daily service, and plenty of our tubs sail well past that with nothing but gentle cleaning.
It is not factory enamel fired onto iron at kiln temperatures, and no honest refinisher will tell you otherwise. It can be scratched by grit, dulled by harsh powders and lifted by standing water in a spot where caulk has failed. It is a durable coating, not a new tub, and it is priced like one.
Two minutes
ZIP, what the tub is made of, what bothers you about it. Said out loud it goes faster than typing, and a photo can follow later if the case is odd.
The same call
The technician who would do the work asks his questions and names a firm figure for a standard job, then confirms it in writing before any van is booked.
You set the date
One van, one technician, drop cloths from the front door to the bathroom. Water off for nothing; only the tub is out of service.
Most of that day
Damage filled and sanded, the room masked, extractor running, then the primer and gloss coats go on in thin, even passes.
24 to 48 hours
The finish hardens untouched, the new caulk bead goes in, and you run the first bath knowing exactly what was done and what to expect of it.
| What we quote | Typical range | Reading the number |
|---|---|---|
| Standard bathtub, reglazed complete | $350 - $800 | Clean, etch, repairs, sprayed gloss and fresh caulk. |
| Chip or rust repair alone | $150 - $300 | When the finish is sound and only one wound needs closing. |
| Clawfoot tub, inside and out | $700 - $1,300 | Two surfaces, more masking, and paint-grade feet if you wish. |
| Shower pan or base | $300 - $550 | Same process on the floor you stand on every morning. |
| Caulk renewal with the job | $90 - $180 | Old bead cut out, mildew-resistant line laid in. |
| Small job minimum | around $250 | The van, the materials and the cure time exist even for tiny work. |
Heavy previous coatings that must be stripped, unusual colors and badly pitted iron push a job toward the top of its bracket. The written price reaches you before the van is even loaded, and it holds.
Ventilation is not a courtesy, it is part of the job. The extractor runs from the first solvent wipe to the last sprayed pass, pulling air out the window instead of through your hallway, and the technician wears supplied air even when the household has gone out for the day. By the evening the bathroom smells like a bathroom again.
The materials are the professional two-part systems made for this trade, mixed fresh on site, never the single-can kits sold next to the paint rollers. It is the difference between a finish that cures into a hard skin and one that stays soft enough to peel at the drain within a season, and it is most of the reason our work carries a written workmanship promise against peeling and loss of adhesion.
And the schedule respects the cure. We tell you in writing when the tub goes back into service, 24 hours for most jobs and 48 for the cautious ones, because handing a family a beautiful surface and letting them ruin it that same night helps nobody. If anything in our workmanship lets go early, the technician comes back and makes it right without a discussion about whose fault the water was.
Strong while spraying, gone surprisingly fast. The extractor vents the room to the outside for the whole job around Laurium, so the rest of the home stays livable, and by the next morning the odor has left with the fumes. Pregnant households and bird owners get the frank version of this talk before booking.
Between 24 and 48 hours after the final coat, and the exact time is written on the paperwork you keep. The first bath is not a gamble; it is a date.
Any color. The most common request is retiring an avocado, pink or almond tub to white, and the coating is tinted before it is sprayed, so the new color is in the material rather than painted over it.
Yes. The prep changes, the primer changes, the result reads the same. Fiberglass with soft, flexing spots gets extra reinforcement talk first, because coating a moving floor is how warranties die.
Now the old coating comes fully off, which is honest work we price plainly, and then the job proceeds as if the tub had never been touched. Peeling almost always means the first crew skipped the etch or sprayed over silicone, not that your tub rejects coatings.
Five years is the floor we are comfortable promising out loud, not the ceiling. With soft cleaners, no standing mats and caulk kept sound, these finishes routinely serve a decade. What we refuse to do is whisper twenty and hope you lose our number.
Zoom for the lay of the land; the link lists further down name every community the van reaches from here.
The technician who picks up when you call works these streets, so the ledger below is home turf rather than trivia.
Somewhere under that worn surface is the tub you chose. One day brings it back.
Call (866) 951-0558