A dull or chipped tub in Lido Beach does not need a demolition crew. It needs one technician, one day and a sprayed finish that shines.
One number reaches the technician who would hold the gun. The figure comes on the call, not after a visit.
(866) 951-0558The voice on the line belongs to the trade, not to a switchboard reading a script. Two minutes of plain description are enough to price a standard tub.
Your old tub probably looks pretty tired right now.
Instead of spending thousands on a noisy demolition project, you can get a shiny surface in just one afternoon.
Our local team visits your home to restore that worn-out basin to its original glory for a fraction of the replacement cost.
First of all, ripping out an existing cast iron or steel fixture forces you to destroy your beautiful wall tiles.
This means you end up paying for plumbers, tile setters, and trash haulers.
Your wallet will feel that pain quickly.
On top of that, the dust from tearing down walls gets everywhere in your house.
You will find white powder on your kitchen plates for weeks.
It is simply not worth the stress.
Thankfully, our specialized surface restoration process avoids all of this chaos.
We work directly on your existing fixture right where it sits.
This keeps your home clean and your sanity intact.
Initially, we protect your entire bathroom with heavy-duty plastic sheets and set up a powerful exhaust fan.
This setup pulls all the chemical fumes and overspray safely out of your window.
Your indoor air stays clean and fresh.
Next, we apply a professional-strength acid etch to strip away years of soap scum and hard water deposits.
This step creates microscopic pores in the old porcelain.
New coatings need this rough texture to stick properly.
After repairing any deep chips or rust spots with waterproof polyester filler, we spray a specialized molecular bonding agent.
This acts like a super-glue between the old enamel and the new topcoat.
Without this step, the new finish would peel off in months.
Finally, we apply several coats of high-tech acrylic urethane using a professional HVLP spray gun.
This material cures into a hard, glossy shell.
You get a beautiful, mirror-like shine that looks identical to a brand new fixture.
| Project Factors | Full Replacement | Our Special Spray Process |
|---|---|---|
| Total Cost | Very High ($3,000 - $8,000) | Very Low ($350 - $650) |
| Time to Complete | 4 to 7 days of loud construction | About 4 to 6 hours total |
| Mess and Dust | Extremely dusty and chaotic | Virtually none |
| Lifespan | 20+ years | 10 to 15 years with proper care |
Imagine stepping into a bathroom that feels like a five-star resort every single morning.
A bright, clean washing area elevates your mood before you start a busy workday.
You deserve to feel proud of your home when guests visit.
This affordable upgrade delivers that high-end look without draining your hard-earned savings.
You save enough cash to go out for a nice dinner or plan your next vacation.
Smart home improvements are all about maximizing your value.
Furthermore, our glossy finish is incredibly easy to wipe clean.
Dirt and grime struggle to stick to the non-porous acrylic surface.
This means you can finally throw away those harsh scrub brushes.
To keep your glossy surface looking fabulous, you must avoid abrasive bleach powders or scratchy green pads.
These rough tools will dull the shiny topcoat over time.
Instead, stick to mild liquid dish soaps or gentle foaming cleansers.
Additionally, never leave wet bottles of shampoo or heavy toys sitting on the rim for weeks.
Moisture can get trapped underneath them and weaken the bond.
A simple shower caddy keeps everything organized and dry.
Lastly, make sure your bathroom faucet does not drip constantly.
Continuous water drops in the exact same spot will eventually wear down any coating.
Fixing a leaky tap early protects your beautiful home investment.
Living out here on the barrier island of Nassau County means dealing with unique coastal humidity.
This salty air can accelerate rust on older bathroom fixtures.
Our team knows exactly how to treat these local rust issues so they never return.
We are proud to serve the wonderful residents of this cozy beach town of 3,009 people.
With a high median household income of $164,063, homeowners here appreciate quality craftsmanship.
We always respect your lovely property and treat it like our own.
Whether your home sits near the scenic dunes or closer to the channel, we travel straight to your door.
We cover all residential properties within the local 11561 area.
Our truck comes fully equipped with everything needed to finish the job in one visit.
When you contact us, we schedule a quick visit to inspect your bathroom's current condition.
We look closely for deep rust, cracks, or previous bad paint jobs.
This inspection ensures we give you an accurate plan.
We then provide a written estimate with absolutely no hidden fees or surprise costs.
You know exactly what you are paying before we even open a can of paint.
Honesty is the foundation of our local business.
Once you approve the plan, we work around your busy schedule to find the perfect day.
Our friendly technician arrives on time and finishes the work efficiently.
You can use your beautiful, shiny tub again in just twenty-four hours.
Do not spend another day staring at that ugly, stained, or outdated color scheme.
Our simple, affordable service brings the joy back to your daily bath routine.
We make the entire process completely stress-free from start to finish.
Take action right now by reaching out to our friendly team for your free price estimate.
We are excited to help you save money while creating a space you absolutely love.
Give us a call to get started today!
Three quiet stages carry the whole result. They are also the ones nobody sees in the after photo.
Stage 1 of 3
A reglaze fails or lasts on what happens before the gun comes out. The old surface gets scrubbed of soap film and silicone, etched or primed so the new material has something to grip, then wet sanded until it feels like fine paper. Skip any of that and the prettiest coat in the world lets go within a year, which is exactly the story most peeling tubs tell us.
Stage 2 of 3
Chips, rust blooms and worn drain rings are ground back to sound material and rebuilt with polyester filler, then sanded flush until a fingertip cannot find the spot. Coating over damage only photographs well on day one; a repair you cannot feel is what keeps the finish honest for years.
Stage 3 of 3
The topcoat goes on in fine sprayed passes with an extractor pulling air out the window the whole time. Sprayed layers flow together into one even skin, which is why the result reads as gloss rather than as paint. Brushes and rollers leave the texture that gives cheap refinishing its reputation.
Three real ways out of a worn tub. We only do the first one, so the other two columns are simply what we would tell a friend.
| The question | Reglazing in place | Acrylic liner | Full replacement |
|---|---|---|---|
| What a standard tub costs | $350 to $800 | $1,600 to $4,000 | $3,000 to $10,000 once walls and plumbing join in |
| Bathroom out of action | One day, then the cure | Weeks of lead time, then a fitting day | One to two weeks of trades |
| Demolition involved | None at all | None, but the old tub is sealed inside | Walls opened, floor patched, debris hauled |
| Honest life expectancy | Five years and up when cared for | Long, unless water creeps between the shells | Decades |
| Watch out for | Prep shortcuts by cut-rate crews | A spongy feel and hidden moisture | The budget doubling mid-project |
If your tub is cracked through, actively leaking underneath, or you simply want a different fixture, reglazing is the wrong tool, a verdict you will hear on the very first call.
Pass 1
Soap scum, silicone and old wax stripped, then the surface etched or bonded so the coating can bite.
Pass 2
Every ding ground out, filled and sanded flush. The repairs disappear under the coating instead of through it.
Pass 3
Tile, faucet, floor and glass papered off. Overspray lands on masking paper, never on grout or chrome.
Pass 4
Primer, then gloss coats laid on in thin passes until the surface reads as one poured skin.
Pass 5
The finish hardens on its own clock, 24 to 48 hours. We tape the door and leave the tub in peace.
Pass 6
Old caulk goes out with the old finish. A new mildew-resistant bead seals tub to tile on the way out.
A reglazed tub is your old tub wearing a professional coating. That is a fine thing to be, as long as everyone knows it going in.
A sprayed acrylic urethane skin, bonded to prepared porcelain, steel or fiberglass. It is smooth, glossy, warm to the touch and fully waterproof. Done properly it gives five years and more of daily service, and plenty of our tubs sail well past that with nothing but gentle cleaning.
It is not factory enamel fired onto iron at kiln temperatures, and no honest refinisher will tell you otherwise. It can be scratched by grit, dulled by harsh powders and lifted by standing water in a spot where caulk has failed. It is a durable coating, not a new tub, and it is priced like one.
Two minutes
ZIP, what the tub is made of, what bothers you about it. Said out loud it goes faster than typing, and a photo can follow later if the case is odd.
The same call
The technician who would do the work asks his questions and names a firm figure for a standard job, then confirms it in writing before any van is booked.
You set the date
One van, one technician, drop cloths from the front door to the bathroom. Water off for nothing; only the tub is out of service.
Most of that day
Damage filled and sanded, the room masked, extractor running, then the primer and gloss coats go on in thin, even passes.
24 to 48 hours
The finish hardens untouched, the new caulk bead goes in, and you run the first bath knowing exactly what was done and what to expect of it.
| What we quote | Typical range | Reading the number |
|---|---|---|
| Standard bathtub, reglazed complete | $350 - $800 | Clean, etch, repairs, sprayed gloss and fresh caulk. |
| Chip or rust repair alone | $150 - $300 | When the finish is sound and only one wound needs closing. |
| Clawfoot tub, inside and out | $700 - $1,300 | Two surfaces, more masking, and paint-grade feet if you wish. |
| Shower pan or base | $300 - $550 | Same process on the floor you stand on every morning. |
| Caulk renewal with the job | $90 - $180 | Old bead cut out, mildew-resistant line laid in. |
| Small job minimum | around $250 | The van, the materials and the cure time exist even for tiny work. |
Heavy previous coatings that must be stripped, unusual colors and badly pitted iron push a job toward the top of its bracket. The written price reaches you before the van is even loaded, and it holds.
Ventilation is not a courtesy, it is part of the job. The extractor runs from the first solvent wipe to the last sprayed pass, pulling air out the window instead of through your hallway, and the technician wears supplied air even when the household has gone out for the day. By the evening the bathroom smells like a bathroom again.
The materials are the professional two-part systems made for this trade, mixed fresh on site, never the single-can kits sold next to the paint rollers. It is the difference between a finish that cures into a hard skin and one that stays soft enough to peel at the drain within a season, and it is most of the reason our work carries a written workmanship promise against peeling and loss of adhesion.
And the schedule respects the cure. We tell you in writing when the tub goes back into service, 24 hours for most jobs and 48 for the cautious ones, because handing a family a beautiful surface and letting them ruin it that same night helps nobody. If anything in our workmanship lets go early, the technician comes back and makes it right without a discussion about whose fault the water was.
Strong while spraying, gone surprisingly fast. The extractor vents the room to the outside for the whole job around Lido Beach, so the rest of the home stays livable, and by the next morning the odor has left with the fumes. Pregnant households and bird owners get the frank version of this talk before booking.
Between 24 and 48 hours after the final coat, and the exact time is written on the paperwork you keep. The first bath is not a gamble; it is a date.
Any color. The most common request is retiring an avocado, pink or almond tub to white, and the coating is tinted before it is sprayed, so the new color is in the material rather than painted over it.
Yes. The prep changes, the primer changes, the result reads the same. Fiberglass with soft, flexing spots gets extra reinforcement talk first, because coating a moving floor is how warranties die.
Now the old coating comes fully off, which is honest work we price plainly, and then the job proceeds as if the tub had never been touched. Peeling almost always means the first crew skipped the etch or sprayed over silicone, not that your tub rejects coatings.
Five years is the floor we are comfortable promising out loud, not the ceiling. With soft cleaners, no standing mats and caulk kept sound, these finishes routinely serve a decade. What we refuse to do is whisper twenty and hope you lose our number.
Zoom for the lay of the land; the link lists further down name every community the van reaches from here.
The technician who picks up when you call works these streets, so the ledger below is home turf rather than trivia.
Somewhere under that worn surface is the tub you chose. One day brings it back.
Call (866) 951-0558