A dull or chipped tub in Mill Plain does not need a demolition crew. It needs one technician, one day and a sprayed finish that shines.
One number reaches the technician who would hold the gun. The figure comes on the call, not after a visit.
(866) 951-0558The voice on the line belongs to the trade, not to a switchboard reading a script. Two minutes of plain description are enough to price a standard tub.
Maybe you cringe every single time you step into your bathroom. If your old tub looks stained or has a nasty color from some bygone decade, you do not have to spend thousands of dollars on a messy demolition. We can completely restore that worn-out surface to a shiny brand-new look in just a single afternoon.
Actually, our local team specializes in saving homeowners from the massive headache of traditional remodeling. By applying a high-tech liquid acrylic coating directly over your existing fixture, we give you a gorgeous finish without the dust. This means you save a fortune while getting a sparkling clean bathroom by tomorrow.
Why wait weeks for contractors to tear your house apart when we can get it done today? You can grab a completely free estimate from us right now to see how affordable this transformation really is. Let us show you how simple it is to upgrade your home with zero stress.
First, we should talk about how this magical transformation actually works. Many people think they need to throw their entire cast iron or fiberglass basin into a landfill when it gets dull. In reality, our process chemical-bonds a new synthetic glaze onto the original structure to make it look pristine.
First of all, we clean the area with specialized industrial prep agents to strip away decades of soap scum. After that, we repair any deep chips, rust spots, or ugly cracks so the base is perfectly smooth. This critical preparation ensures the new coating sticks forever instead of peeling off next month.
Next, we spray a premium topcoat that cures into an incredibly hard, glossy shell. Which means you get a non-porous surface that resists dirt and is super easy to wipe clean. You will finally stop scrubbing for hours with harsh chemicals just to get a decent shine.
Now, let us compare the actual costs of buying a new unit versus restoring the one you have. Buying a cheap replacement at the local home improvement store sounds easy until you factor in the plumber. On top of that, you usually have to rip out surrounding tiles, wallboard, and floor trim just to get the old one out.
This is where our specialized service saves your sanity and your wallet. We do all the work right in place without disturbing your walls or your plumbing fixtures. Because of this, you keep your classic, heavy-duty original tub but get a clean, modern look.
To help you visualize the massive differences, here is a quick breakdown of what you can expect:
| Factor | Full Replacement Project | Our Refinishing Method |
|---|---|---|
| Average Cost | Very high (often thousands) | Extremely budget-friendly |
| Time Required | One to two weeks of chaos | Only a few hours |
| Demolition Mess | Plaster dust everywhere | Absolutely none |
| Durability | Depends on the new cheap material | Lasts for many years with basic care |
Indeed, choosing to renew your current fixture keeps heavy trash out of our local landfills. This lets you make an eco-friendly choice while upgrading your daily lifestyle. You get to enjoy a luxurious bathing experience without the environmental guilt or the empty bank account.
You might wonder why so many of your neighbors trust us with their bathroom projects. Well, we live and work right here in this beautiful corner of the Pacific Northwest, specifically serving the wonderful community of Mill Plain, Washington. This lovely area in Clark County has about 7,400 residents who appreciate quality craftsmanship and honest, hard work.
Since we know the local homes well, we understand the common issues with older plumbing in ZIP code 98684. Many households here enjoy a comfortable lifestyle with a healthy median household income, which means investing in home maintenance makes great financial sense. We treat your property with the utmost respect, just like we would treat our own family home.
Naturally, we never cut corners on our materials or our ventilation setup during the process. We use commercial exhaust fans to pull any fumes out of your house while we spray the new finish. This ensures your family and your pets stay safe and cozy throughout the entire project.
Once we finish our work, you will want to keep that beautiful shine looking perfect for a long time. Fortunately, taking care of a refinished surface is actually much easier than dealing with old, porous porcelain. You only need to use mild, non-abrasive cleaners like dish soap or simple warm water to keep it bright.
However, you must avoid harsh scrubbing powders or steel wool pads because they will dull the gloss over time. This simple rule protects your investment and ensures the protective barrier stays intact. Which means you can say goodbye to those exhausting, back-breaking cleaning sessions forever.
Additionally, we recommend keeping leaky faucets dripless to prevent water from pooling constantly in one spot. While our coatings are incredibly tough, constant dripping over several years can wear down even the strongest materials. A tiny plumbing fix today will keep your beautiful bathroom looking like a high-end spa for a decade.
Are you ready to finally fall in love with your bathroom all over again? You do not have to live with a stained, dated, or scratched-up basin for another single day. Our friendly crew is standing by to visit your home and give you a detailed, honest evaluation.
Actually, we provide a completely free quote with absolutely no obligation or high-pressure sales tactics. We simply look at your current fixture, explain the process, and give you a fair, straightforward price. This lets you make the best decision for your home and your budget on your own terms.
So, why not take action today and reclaim your peace of mind? Simply reach out to us to schedule your quick consultation. We look forward to helping you create a clean, beautiful space that you can show off with pride...
Three quiet stages carry the whole result. They are also the ones nobody sees in the after photo.
Stage 1 of 3
A reglaze fails or lasts on what happens before the gun comes out. The old surface gets scrubbed of soap film and silicone, etched or primed so the new material has something to grip, then wet sanded until it feels like fine paper. Skip any of that and the prettiest coat in the world lets go within a year, which is exactly the story most peeling tubs tell us.
Stage 2 of 3
Chips, rust blooms and worn drain rings are ground back to sound material and rebuilt with polyester filler, then sanded flush until a fingertip cannot find the spot. Coating over damage only photographs well on day one; a repair you cannot feel is what keeps the finish honest for years.
Stage 3 of 3
The topcoat goes on in fine sprayed passes with an extractor pulling air out the window the whole time. Sprayed layers flow together into one even skin, which is why the result reads as gloss rather than as paint. Brushes and rollers leave the texture that gives cheap refinishing its reputation.
Three real ways out of a worn tub. We only do the first one, so the other two columns are simply what we would tell a friend.
| The question | Reglazing in place | Acrylic liner | Full replacement |
|---|---|---|---|
| What a standard tub costs | $350 to $800 | $1,600 to $4,000 | $3,000 to $10,000 once walls and plumbing join in |
| Bathroom out of action | One day, then the cure | Weeks of lead time, then a fitting day | One to two weeks of trades |
| Demolition involved | None at all | None, but the old tub is sealed inside | Walls opened, floor patched, debris hauled |
| Honest life expectancy | Five years and up when cared for | Long, unless water creeps between the shells | Decades |
| Watch out for | Prep shortcuts by cut-rate crews | A spongy feel and hidden moisture | The budget doubling mid-project |
If your tub is cracked through, actively leaking underneath, or you simply want a different fixture, reglazing is the wrong tool, a verdict you will hear on the very first call.
Pass 1
Soap scum, silicone and old wax stripped, then the surface etched or bonded so the coating can bite.
Pass 2
Every ding ground out, filled and sanded flush. The repairs disappear under the coating instead of through it.
Pass 3
Tile, faucet, floor and glass papered off. Overspray lands on masking paper, never on grout or chrome.
Pass 4
Primer, then gloss coats laid on in thin passes until the surface reads as one poured skin.
Pass 5
The finish hardens on its own clock, 24 to 48 hours. We tape the door and leave the tub in peace.
Pass 6
Old caulk goes out with the old finish. A new mildew-resistant bead seals tub to tile on the way out.
A reglazed tub is your old tub wearing a professional coating. That is a fine thing to be, as long as everyone knows it going in.
A sprayed acrylic urethane skin, bonded to prepared porcelain, steel or fiberglass. It is smooth, glossy, warm to the touch and fully waterproof. Done properly it gives five years and more of daily service, and plenty of our tubs sail well past that with nothing but gentle cleaning.
It is not factory enamel fired onto iron at kiln temperatures, and no honest refinisher will tell you otherwise. It can be scratched by grit, dulled by harsh powders and lifted by standing water in a spot where caulk has failed. It is a durable coating, not a new tub, and it is priced like one.
Two minutes
ZIP, what the tub is made of, what bothers you about it. Said out loud it goes faster than typing, and a photo can follow later if the case is odd.
The same call
The technician who would do the work asks his questions and names a firm figure for a standard job, then confirms it in writing before any van is booked.
You set the date
One van, one technician, drop cloths from the front door to the bathroom. Water off for nothing; only the tub is out of service.
Most of that day
Damage filled and sanded, the room masked, extractor running, then the primer and gloss coats go on in thin, even passes.
24 to 48 hours
The finish hardens untouched, the new caulk bead goes in, and you run the first bath knowing exactly what was done and what to expect of it.
| What we quote | Typical range | Reading the number |
|---|---|---|
| Standard bathtub, reglazed complete | $350 - $800 | Clean, etch, repairs, sprayed gloss and fresh caulk. |
| Chip or rust repair alone | $150 - $300 | When the finish is sound and only one wound needs closing. |
| Clawfoot tub, inside and out | $700 - $1,300 | Two surfaces, more masking, and paint-grade feet if you wish. |
| Shower pan or base | $300 - $550 | Same process on the floor you stand on every morning. |
| Caulk renewal with the job | $90 - $180 | Old bead cut out, mildew-resistant line laid in. |
| Small job minimum | around $250 | The van, the materials and the cure time exist even for tiny work. |
Heavy previous coatings that must be stripped, unusual colors and badly pitted iron push a job toward the top of its bracket. The written price reaches you before the van is even loaded, and it holds.
Ventilation is not a courtesy, it is part of the job. The extractor runs from the first solvent wipe to the last sprayed pass, pulling air out the window instead of through your hallway, and the technician wears supplied air even when the household has gone out for the day. By the evening the bathroom smells like a bathroom again.
The materials are the professional two-part systems made for this trade, mixed fresh on site, never the single-can kits sold next to the paint rollers. It is the difference between a finish that cures into a hard skin and one that stays soft enough to peel at the drain within a season, and it is most of the reason our work carries a written workmanship promise against peeling and loss of adhesion.
And the schedule respects the cure. We tell you in writing when the tub goes back into service, 24 hours for most jobs and 48 for the cautious ones, because handing a family a beautiful surface and letting them ruin it that same night helps nobody. If anything in our workmanship lets go early, the technician comes back and makes it right without a discussion about whose fault the water was.
Strong while spraying, gone surprisingly fast. The extractor vents the room to the outside for the whole job around Mill Plain, so the rest of the home stays livable, and by the next morning the odor has left with the fumes. Pregnant households and bird owners get the frank version of this talk before booking.
Between 24 and 48 hours after the final coat, and the exact time is written on the paperwork you keep. The first bath is not a gamble; it is a date.
Any color. The most common request is retiring an avocado, pink or almond tub to white, and the coating is tinted before it is sprayed, so the new color is in the material rather than painted over it.
Yes. The prep changes, the primer changes, the result reads the same. Fiberglass with soft, flexing spots gets extra reinforcement talk first, because coating a moving floor is how warranties die.
Now the old coating comes fully off, which is honest work we price plainly, and then the job proceeds as if the tub had never been touched. Peeling almost always means the first crew skipped the etch or sprayed over silicone, not that your tub rejects coatings.
Five years is the floor we are comfortable promising out loud, not the ceiling. With soft cleaners, no standing mats and caulk kept sound, these finishes routinely serve a decade. What we refuse to do is whisper twenty and hope you lose our number.
Zoom for the lay of the land; the link lists further down name every community the van reaches from here.
The technician who picks up when you call works these streets, so the ledger below is home turf rather than trivia.
Somewhere under that worn surface is the tub you chose. One day brings it back.
Call (866) 951-0558