A dull or chipped tub in Pecan Acres does not need a demolition crew. It needs one technician, one day and a sprayed finish that shines.
One number reaches the technician who would hold the gun. The figure comes on the call, not after a visit.
(866) 951-0558The voice on the line belongs to the trade, not to a switchboard reading a script. Two minutes of plain description are enough to price a standard tub.
You can actually save a ton of cash right now by choosing to restore your existing bathroom fixtures instead of tearing them out. Our professional crew comes straight to your home in Tarrant County to give your worn-out surfaces a gorgeous, shiny new life. Getting a free estimate today will help you plan this quick upgrade without dealing with the mess of a dusty demolition project.
Let us face the truth about bathroom remodeling because it gets incredibly expensive very fast. If you choose to rip out an old cast iron or steel tub, you usually end up breaking surrounding tiles and paying plumbers a fortune. This specialized chemical bonding process avoids all that headache by applying a fresh, durable acrylic-urethane coating right over your existing basin.
This means you get to keep your sturdy old fixture while making it look brand new. Many older homes in this lovely area, which boasts a comfortable median household income of $107,813, actually have very high-quality original fixtures. Throwing away those durable vintage tubs just because they have some stains or minor chips is a huge waste of money.
On top of that, the entire project takes less than a single day to finish. You do not have to live in a construction zone for weeks or wait for permits to clear. Which means you can go back to using your gorgeous, refreshed bathroom by the very next weekend without any stress.
First, our skilled technicians thoroughly clean the old surface using specialized industrial acid cleaners to strip away decades of soap scum, body oils, and hard water deposits. This step is absolutely crucial because the new coating will not stick to a dirty or greasy surface. We take our time here to make sure every single spot is totally clean.
Next, we repair any deep scratches, rust spots, or chips using a tough polyester filler that cures incredibly fast. Once we sand those repaired areas completely flat, we apply a proprietary bonding agent that acts like a chemical superglue. This special primer ensures that the final topcoat fuses permanently with the original porcelain or fiberglass.
| Project Step | What We Do | Benefit For You |
|---|---|---|
| Deep Prep | Acid wash and etch surface | Ensures maximum coating adhesion |
| Damage Repair | Fill chips and sand flat | Creates a perfectly smooth touch |
| Bonding Agent | Apply molecular primer | Prevents future peeling or lifting |
| Topcoat Spray | Apply multiple premium layers | Delivers a brilliant, glossy shine |
After that, we carefully spray several layers of a high-tech acrylic urethane finish using professional ventilation equipment. This state-of-the-art spray system creates a smooth, factory-like shine that looks identical to a brand-new fixture. You will love how easy it is to keep this non-porous material clean in the future.
Think about the sheer amount of dust and noise that comes with traditional bathroom remodeling. By opting for a professional surface coating instead, you keep tons of heavy waste out of local Texas landfills. This eco-friendly choice protects the environment while keeping your hard-earned money in your wallet.
Moreover, the cost savings are simply too massive to ignore. You can easily spend thousands of dollars on a basic replacement project once you factor in the cost of new tiles, drywall, and plumbing hookups. Our affordable service gives you the exact same visual result for a tiny fraction of that cost.
This smart upgrade also boosts the overall appeal of your home if you ever decide to sell. Buyers in the 76052 ZIP code area love seeing clean, updated bathrooms that do not require immediate work. It is an easy way to add instant value to your property without any major stress.
To keep your newly coated surface looking spectacular for many years, you must avoid harsh abrasive cleaners like bleach or gritty scrubbing powders. These rough chemicals can dull the beautiful high-gloss shine over time and wear down the protective layers. Instead, you should use mild dish soap or gentle foaming bathroom sprays.
Another great tip is to avoid leaving wet bottles of shampoo or heavy toys sitting on the rim of the basin. Moisture trapped under these items can eventually weaken the chemical bond and cause premature peeling. Taking care of your renewed surface is actually very simple once you know these basic rules...
We also highly recommend fixing any leaky faucets as soon as possible. Constant dripping can create mineral stains and slowly erode even the toughest professional coatings. Taking care of these small plumbing issues early will extend the life of your beautiful new finish by a decade.
We are incredibly proud to serve the friendly families living in this peaceful neighborhood of 5,670 residents. The community of Pecan Acres is known for its beautiful properties and wonderful country atmosphere. Our local service providers understand the specific needs of homeowners in this thriving part of the Lone Star State.
Because we live and work nearby, we can easily drive out to your property to look at your bathroom in person. We never charge for these initial visits, and we always provide an honest, upfront price estimate. You can ask us any questions you have about the process during your free home consultation.
Many homeowners try to use cheap epoxy kits from the local hardware store to save a few extra bucks. However, these consumer-grade products are usually applied with brushes or rollers, which leaves ugly brush marks and uneven thick spots. They also lack the professional bonding agents needed to prevent the paint from peeling off within a few months.
Our commercial-grade equipment and specialized chemicals are simply not available to the general public. We use high-velocity spray guns that apply the coating with extreme precision for a flawless look. Investing in professional work saves you from the nightmare of having to strip off a failed DIY paint job later.
On top of that, working with strong chemical fumes can be quite dangerous without the proper safety gear. Our team uses professional exhaust fans and full-face respirators to keep your family and pets completely safe during the application. We handle all the dirty work so you can relax and enjoy the transformation.
Are you ready to finally get rid of that ugly, stained bathroom fixture? Our friendly team is standing by to help you plan this simple and highly rewarding home improvement project. Contact us today to request your completely free, no-obligation written estimate.
We will schedule a convenient time to visit your home and evaluate the condition of your current bathroom surfaces. You will receive a clear, honest price with absolutely no hidden fees or high-pressure sales tactics. Let us help you fall in love with your bathroom all over again!
Three quiet stages carry the whole result. They are also the ones nobody sees in the after photo.
Stage 1 of 3
A reglaze fails or lasts on what happens before the gun comes out. The old surface gets scrubbed of soap film and silicone, etched or primed so the new material has something to grip, then wet sanded until it feels like fine paper. Skip any of that and the prettiest coat in the world lets go within a year, which is exactly the story most peeling tubs tell us.
Stage 2 of 3
Chips, rust blooms and worn drain rings are ground back to sound material and rebuilt with polyester filler, then sanded flush until a fingertip cannot find the spot. Coating over damage only photographs well on day one; a repair you cannot feel is what keeps the finish honest for years.
Stage 3 of 3
The topcoat goes on in fine sprayed passes with an extractor pulling air out the window the whole time. Sprayed layers flow together into one even skin, which is why the result reads as gloss rather than as paint. Brushes and rollers leave the texture that gives cheap refinishing its reputation.
Three real ways out of a worn tub. We only do the first one, so the other two columns are simply what we would tell a friend.
| The question | Reglazing in place | Acrylic liner | Full replacement |
|---|---|---|---|
| What a standard tub costs | $350 to $800 | $1,600 to $4,000 | $3,000 to $10,000 once walls and plumbing join in |
| Bathroom out of action | One day, then the cure | Weeks of lead time, then a fitting day | One to two weeks of trades |
| Demolition involved | None at all | None, but the old tub is sealed inside | Walls opened, floor patched, debris hauled |
| Honest life expectancy | Five years and up when cared for | Long, unless water creeps between the shells | Decades |
| Watch out for | Prep shortcuts by cut-rate crews | A spongy feel and hidden moisture | The budget doubling mid-project |
If your tub is cracked through, actively leaking underneath, or you simply want a different fixture, reglazing is the wrong tool, a verdict you will hear on the very first call.
Pass 1
Soap scum, silicone and old wax stripped, then the surface etched or bonded so the coating can bite.
Pass 2
Every ding ground out, filled and sanded flush. The repairs disappear under the coating instead of through it.
Pass 3
Tile, faucet, floor and glass papered off. Overspray lands on masking paper, never on grout or chrome.
Pass 4
Primer, then gloss coats laid on in thin passes until the surface reads as one poured skin.
Pass 5
The finish hardens on its own clock, 24 to 48 hours. We tape the door and leave the tub in peace.
Pass 6
Old caulk goes out with the old finish. A new mildew-resistant bead seals tub to tile on the way out.
A reglazed tub is your old tub wearing a professional coating. That is a fine thing to be, as long as everyone knows it going in.
A sprayed acrylic urethane skin, bonded to prepared porcelain, steel or fiberglass. It is smooth, glossy, warm to the touch and fully waterproof. Done properly it gives five years and more of daily service, and plenty of our tubs sail well past that with nothing but gentle cleaning.
It is not factory enamel fired onto iron at kiln temperatures, and no honest refinisher will tell you otherwise. It can be scratched by grit, dulled by harsh powders and lifted by standing water in a spot where caulk has failed. It is a durable coating, not a new tub, and it is priced like one.
Two minutes
ZIP, what the tub is made of, what bothers you about it. Said out loud it goes faster than typing, and a photo can follow later if the case is odd.
The same call
The technician who would do the work asks his questions and names a firm figure for a standard job, then confirms it in writing before any van is booked.
You set the date
One van, one technician, drop cloths from the front door to the bathroom. Water off for nothing; only the tub is out of service.
Most of that day
Damage filled and sanded, the room masked, extractor running, then the primer and gloss coats go on in thin, even passes.
24 to 48 hours
The finish hardens untouched, the new caulk bead goes in, and you run the first bath knowing exactly what was done and what to expect of it.
| What we quote | Typical range | Reading the number |
|---|---|---|
| Standard bathtub, reglazed complete | $350 - $800 | Clean, etch, repairs, sprayed gloss and fresh caulk. |
| Chip or rust repair alone | $150 - $300 | When the finish is sound and only one wound needs closing. |
| Clawfoot tub, inside and out | $700 - $1,300 | Two surfaces, more masking, and paint-grade feet if you wish. |
| Shower pan or base | $300 - $550 | Same process on the floor you stand on every morning. |
| Caulk renewal with the job | $90 - $180 | Old bead cut out, mildew-resistant line laid in. |
| Small job minimum | around $250 | The van, the materials and the cure time exist even for tiny work. |
Heavy previous coatings that must be stripped, unusual colors and badly pitted iron push a job toward the top of its bracket. The written price reaches you before the van is even loaded, and it holds.
Ventilation is not a courtesy, it is part of the job. The extractor runs from the first solvent wipe to the last sprayed pass, pulling air out the window instead of through your hallway, and the technician wears supplied air even when the household has gone out for the day. By the evening the bathroom smells like a bathroom again.
The materials are the professional two-part systems made for this trade, mixed fresh on site, never the single-can kits sold next to the paint rollers. It is the difference between a finish that cures into a hard skin and one that stays soft enough to peel at the drain within a season, and it is most of the reason our work carries a written workmanship promise against peeling and loss of adhesion.
And the schedule respects the cure. We tell you in writing when the tub goes back into service, 24 hours for most jobs and 48 for the cautious ones, because handing a family a beautiful surface and letting them ruin it that same night helps nobody. If anything in our workmanship lets go early, the technician comes back and makes it right without a discussion about whose fault the water was.
Strong while spraying, gone surprisingly fast. The extractor vents the room to the outside for the whole job around Pecan Acres, so the rest of the home stays livable, and by the next morning the odor has left with the fumes. Pregnant households and bird owners get the frank version of this talk before booking.
Between 24 and 48 hours after the final coat, and the exact time is written on the paperwork you keep. The first bath is not a gamble; it is a date.
Any color. The most common request is retiring an avocado, pink or almond tub to white, and the coating is tinted before it is sprayed, so the new color is in the material rather than painted over it.
Yes. The prep changes, the primer changes, the result reads the same. Fiberglass with soft, flexing spots gets extra reinforcement talk first, because coating a moving floor is how warranties die.
Now the old coating comes fully off, which is honest work we price plainly, and then the job proceeds as if the tub had never been touched. Peeling almost always means the first crew skipped the etch or sprayed over silicone, not that your tub rejects coatings.
Five years is the floor we are comfortable promising out loud, not the ceiling. With soft cleaners, no standing mats and caulk kept sound, these finishes routinely serve a decade. What we refuse to do is whisper twenty and hope you lose our number.
Zoom for the lay of the land; the link lists further down name every community the van reaches from here.
The technician who picks up when you call works these streets, so the ledger below is home turf rather than trivia.
Somewhere under that worn surface is the tub you chose. One day brings it back.
Call (866) 951-0558