A dull or chipped tub in Potosi does not need a demolition crew. It needs one technician, one day and a sprayed finish that shines.
One number reaches the technician who would hold the gun. The figure comes on the call, not after a visit.
(866) 951-0558The voice on the line belongs to the trade, not to a switchboard reading a script. Two minutes of plain description are enough to price a standard tub.
You look at that stained tub every single day and wonder if a sledgehammer is the only answer.
Luckily, a smart alternative exists that saves your sanity and your wallet.
Our local crew brings back the shine to your worn fixtures right in your home.
Imagine avoiding the dusty mess of ripping out old plumbing and drywall.
This affordable restoration process breathes fresh life into tired porcelain and fiberglass surfaces.
We help you bypass the retail markup of buying brand new fixtures.
Naturally, you want a beautiful home but do not want to spend thousands.
By choosing this specialized resurfacing method, you keep your original setup intact while upgrading the style.
Which means you get to enjoy a sparkling clean finish in just a few hours.
Over time, harsh cleaners strip away the original protective glaze on your wash basin.
This leaves the surface porous, which basically acts like a magnet for dirt and soap scum.
Our on-site liquid porcelain application seals those microscopic pores to block future stains.
When you hire our team, we start with a deep chemical cleaning to prep the area.
After repairing any deep chips or cracks, we apply a proprietary bonding agent that acts like superglue.
This ensures the new glossy topcoat sticks forever instead of peeling off next month.
Many homeowners try those cheap DIY paint kits from the big box store.
Honestly, those brushed-on coatings usually start flaking within a few weeks because they lack professional-grade bonding power.
You deserve a durable finish that looks like it came straight from the showroom floor.
| Service Type | Average Cost Range | Project Duration | Expected Lifespan |
|---|---|---|---|
| Standard Tub Resurfacing | $350 - $600 | 3 - 5 Hours | 10+ Years with proper care |
| Tile Surround Restoration | $400 - $800 | 4 - 6 Hours | 8 - 12 Years |
| Chip and Scratch Repairs | $150 - $250 | 1 - 2 Hours | Permanent fix |
These numbers show why so many budget-conscious families prefer restoration over replacement.
As you can see, you save roughly seventy percent of what a traditional remodel would run.
Plus, you can use your shower again in just twenty-four hours.
We believe in honest pricing without any hidden fees or surprise charges.
Our technician will inspect your setup and hand you a detailed, written cost assessment for free.
This lets you plan your home upgrade without any financial stress.
To start, we use advanced exhaust ventilation systems to pull all chemical fumes out of your house.
This keeps your indoor air clean and safe for your kids and pets during the application.
On top of that, our materials cure incredibly fast so your daily routine suffers minimal disruption.
You also get to customize the look by choosing from several modern color options.
Whether you want a classic bright white, a soft almond, or a modern gray, we have you covered.
This flexibility lets you match your existing tile work without replacing everything.
Let us face the truth that old cast iron tubs are built way better than modern plastic ones.
By restoring the finish on your heavy vintage basin, you preserve that classic craftsmanship.
You get the best of both worlds, which is historic durability combined with modern cleanliness.
With basic care, your newly coated fixture will look incredible for a decade or more.
You simply need to avoid abrasive bleach powders and scratchy scrubbing pads that dull the shine.
This simple maintenance shift protects your investment for years down the road.
We always share the best cleaning tips with you before we pack up our tools.
Using mild dish soap or a gentle spray cleaner keeps the surface gleaming like glass.
Which means you spend less time scrubbing on your hands and knees every weekend.
Our service area covers the beautiful historic region near the Mississippi River.
We love working in this quiet corner of Grant County, where neighbors still help neighbors.
With a local population of 698 residents, we treat every customer like a close friend.
We know that the median household income here is around $50,714, so saving money matters.
Spending thousands on a bathroom contractor just does not make sense when a better option exists.
Our affordable solutions keep hard-earned money in your pocket while boosting your property value.
Whether you live near the Great River Road or right in the heart of ZIP code 53820, we are nearby.
Since we live and work in this part of Wisconsin, we can arrive quickly for your consultation.
You get prompt, friendly service from a contractor who actually cares about the local community.
At first glance, a brand new tub at the store looks pretty cheap.
However, you have to pay a plumber to hook it up, a carpenter to fix the drywall, and a tiler to patch the walls.
Suddenly, that cheap purchase turns into a massive construction project that drags on for weeks.
Our specialized restoration process bypasses all of those extra tradespeople entirely.
A single technician handles the entire job from start to finish in a single afternoon.
This keeps your home quiet and free from a parade of noisy construction workers.
You do not have to live with an ugly, stained wash basin any longer.
Our friendly team is ready to visit your home and evaluate your bathroom surfaces.
We provide a clear, honest breakdown of the costs so you can make the best choice.
To get started, simply reach out and request your complimentary home estimate.
We will answer all your questions about the process and show you real color samples.
This step brings you one day closer to the beautiful, clean bathroom you deserve.
Take action today to transform your home without the high cost of remodeling.
Ring the number at the top of this page to schedule your free on-site consultation.
Let us help you bring back the sparkle to your favorite space!
Three quiet stages carry the whole result. They are also the ones nobody sees in the after photo.
Stage 1 of 3
A reglaze fails or lasts on what happens before the gun comes out. The old surface gets scrubbed of soap film and silicone, etched or primed so the new material has something to grip, then wet sanded until it feels like fine paper. Skip any of that and the prettiest coat in the world lets go within a year, which is exactly the story most peeling tubs tell us.
Stage 2 of 3
Chips, rust blooms and worn drain rings are ground back to sound material and rebuilt with polyester filler, then sanded flush until a fingertip cannot find the spot. Coating over damage only photographs well on day one; a repair you cannot feel is what keeps the finish honest for years.
Stage 3 of 3
The topcoat goes on in fine sprayed passes with an extractor pulling air out the window the whole time. Sprayed layers flow together into one even skin, which is why the result reads as gloss rather than as paint. Brushes and rollers leave the texture that gives cheap refinishing its reputation.
Three real ways out of a worn tub. We only do the first one, so the other two columns are simply what we would tell a friend.
| The question | Reglazing in place | Acrylic liner | Full replacement |
|---|---|---|---|
| What a standard tub costs | $350 to $800 | $1,600 to $4,000 | $3,000 to $10,000 once walls and plumbing join in |
| Bathroom out of action | One day, then the cure | Weeks of lead time, then a fitting day | One to two weeks of trades |
| Demolition involved | None at all | None, but the old tub is sealed inside | Walls opened, floor patched, debris hauled |
| Honest life expectancy | Five years and up when cared for | Long, unless water creeps between the shells | Decades |
| Watch out for | Prep shortcuts by cut-rate crews | A spongy feel and hidden moisture | The budget doubling mid-project |
If your tub is cracked through, actively leaking underneath, or you simply want a different fixture, reglazing is the wrong tool, a verdict you will hear on the very first call.
Pass 1
Soap scum, silicone and old wax stripped, then the surface etched or bonded so the coating can bite.
Pass 2
Every ding ground out, filled and sanded flush. The repairs disappear under the coating instead of through it.
Pass 3
Tile, faucet, floor and glass papered off. Overspray lands on masking paper, never on grout or chrome.
Pass 4
Primer, then gloss coats laid on in thin passes until the surface reads as one poured skin.
Pass 5
The finish hardens on its own clock, 24 to 48 hours. We tape the door and leave the tub in peace.
Pass 6
Old caulk goes out with the old finish. A new mildew-resistant bead seals tub to tile on the way out.
A reglazed tub is your old tub wearing a professional coating. That is a fine thing to be, as long as everyone knows it going in.
A sprayed acrylic urethane skin, bonded to prepared porcelain, steel or fiberglass. It is smooth, glossy, warm to the touch and fully waterproof. Done properly it gives five years and more of daily service, and plenty of our tubs sail well past that with nothing but gentle cleaning.
It is not factory enamel fired onto iron at kiln temperatures, and no honest refinisher will tell you otherwise. It can be scratched by grit, dulled by harsh powders and lifted by standing water in a spot where caulk has failed. It is a durable coating, not a new tub, and it is priced like one.
Two minutes
ZIP, what the tub is made of, what bothers you about it. Said out loud it goes faster than typing, and a photo can follow later if the case is odd.
The same call
The technician who would do the work asks his questions and names a firm figure for a standard job, then confirms it in writing before any van is booked.
You set the date
One van, one technician, drop cloths from the front door to the bathroom. Water off for nothing; only the tub is out of service.
Most of that day
Damage filled and sanded, the room masked, extractor running, then the primer and gloss coats go on in thin, even passes.
24 to 48 hours
The finish hardens untouched, the new caulk bead goes in, and you run the first bath knowing exactly what was done and what to expect of it.
| What we quote | Typical range | Reading the number |
|---|---|---|
| Standard bathtub, reglazed complete | $350 - $800 | Clean, etch, repairs, sprayed gloss and fresh caulk. |
| Chip or rust repair alone | $150 - $300 | When the finish is sound and only one wound needs closing. |
| Clawfoot tub, inside and out | $700 - $1,300 | Two surfaces, more masking, and paint-grade feet if you wish. |
| Shower pan or base | $300 - $550 | Same process on the floor you stand on every morning. |
| Caulk renewal with the job | $90 - $180 | Old bead cut out, mildew-resistant line laid in. |
| Small job minimum | around $250 | The van, the materials and the cure time exist even for tiny work. |
Heavy previous coatings that must be stripped, unusual colors and badly pitted iron push a job toward the top of its bracket. The written price reaches you before the van is even loaded, and it holds.
Ventilation is not a courtesy, it is part of the job. The extractor runs from the first solvent wipe to the last sprayed pass, pulling air out the window instead of through your hallway, and the technician wears supplied air even when the household has gone out for the day. By the evening the bathroom smells like a bathroom again.
The materials are the professional two-part systems made for this trade, mixed fresh on site, never the single-can kits sold next to the paint rollers. It is the difference between a finish that cures into a hard skin and one that stays soft enough to peel at the drain within a season, and it is most of the reason our work carries a written workmanship promise against peeling and loss of adhesion.
And the schedule respects the cure. We tell you in writing when the tub goes back into service, 24 hours for most jobs and 48 for the cautious ones, because handing a family a beautiful surface and letting them ruin it that same night helps nobody. If anything in our workmanship lets go early, the technician comes back and makes it right without a discussion about whose fault the water was.
Strong while spraying, gone surprisingly fast. The extractor vents the room to the outside for the whole job around Potosi, so the rest of the home stays livable, and by the next morning the odor has left with the fumes. Pregnant households and bird owners get the frank version of this talk before booking.
Between 24 and 48 hours after the final coat, and the exact time is written on the paperwork you keep. The first bath is not a gamble; it is a date.
Any color. The most common request is retiring an avocado, pink or almond tub to white, and the coating is tinted before it is sprayed, so the new color is in the material rather than painted over it.
Yes. The prep changes, the primer changes, the result reads the same. Fiberglass with soft, flexing spots gets extra reinforcement talk first, because coating a moving floor is how warranties die.
Now the old coating comes fully off, which is honest work we price plainly, and then the job proceeds as if the tub had never been touched. Peeling almost always means the first crew skipped the etch or sprayed over silicone, not that your tub rejects coatings.
Five years is the floor we are comfortable promising out loud, not the ceiling. With soft cleaners, no standing mats and caulk kept sound, these finishes routinely serve a decade. What we refuse to do is whisper twenty and hope you lose our number.
Zoom for the lay of the land; the link lists further down name every community the van reaches from here.
The technician who picks up when you call works these streets, so the ledger below is home turf rather than trivia.
Somewhere under that worn surface is the tub you chose. One day brings it back.
Call (866) 951-0558