A dull or chipped tub in Pryor does not need a demolition crew. It needs one technician, one day and a sprayed finish that shines.
One number reaches the technician who would hold the gun. The figure comes on the call, not after a visit.
(866) 951-0558The voice on the line belongs to the trade, not to a switchboard reading a script. Two minutes of plain description are enough to price a standard tub.
Your old tub probably looks like it survived a war.
Maybe the surface has turned a depressing shade of dirty beige over the years.
Fortunately, you do not have to rip out your entire wall just to get a clean, shiny place to take a bath.
Getting a professional to apply a fresh, durable liquid coating over your existing basin saves you thousands of dollars.
This smart process coats your worn-out cast iron or fiberglass with a high-performance acrylic polymer.
As a result, you get a sparkling surface that looks identical to a brand new fixture straight from the showroom floor.
Our local team travels right to your home to handle the entire messy process from start to finish.
Because we believe in honest business, we always offer a completely free written estimate before any work begins.
This upfront pricing ensures you never have to worry about surprise fees when the bill arrives.
First, we must deeply clean the old porcelain or acrylic to remove decades of soap scum and body oils.
If we skip this critical prep step, the new finish will simply peel off like a bad sunburn.
That is why we use specialized acid etchers to create microscopic pores in the original glaze.
Next, our technicians carefully repair any ugly chips, deep scratches, or rust spots using waterproof polyester fillers.
Once those patches dry, we sand them completely flat so the damage vanishes under the new layers.
After that, we spray a specialized molecular bonding agent that acts like superglue between the old tub and the new coating.
Finally, we apply several coats of a high-tech aliphatic acrylic polyurethane using a professional spray gun.
This heavy-duty material cures into an incredibly hard, glossy shell that resists hot water and impact.
This process leaves you with a gorgeous finish that feels incredibly smooth against your skin.
| Project Phase | What We Do | Benefit to You |
|---|---|---|
| Etching & Cleaning | Remove grime and acid-etch the surface | Ensures the new coating sticks forever |
| Surface Repair | Fill in deep chips, cracks, and rust holes | Creates a perfectly flat, seamless look |
| Bonding Agent | Apply a chemical primer coat | Prevents peeling and bubbling down the road |
| Topcoat Spraying | Apply premium acrylic polyurethane layers | Delivers a brilliant, glassy shine |
Replacing a built-in bathing fixture often turns into a literal nightmare for your wallet.
You usually have to destroy the surrounding tiles, hire a costly plumber, and pay disposal fees at the local dump.
By choosing our restoration service, you completely bypass the dust, noise, and headache of a major demolition project.
Most standard replacement jobs drag on for a week or more, leaving your household in total chaos.
In contrast, our skilled spray technicians can finish the entire transformation in just a few short hours.
This speed means you can start soaking in your beautiful, rejuvenated basin by the very next day.
Keeping your existing fixture also prevents heavy, non-biodegradable cast iron and fiberglass from piling up in landfills.
Which means you are making an environmentally friendly choice while keeping your hard-earned money in your pocket.
On top of that, you preserve the vintage charm of older homes that have uniquely shaped, heavy-duty original fixtures.
First, we protect your bathroom floor, vanity, and walls with heavy drop cloths and plastic sheeting.
We also set up a powerful exhaust fan in the window to pull all the chemical fumes and overspray safely outside.
This careful setup ensures your home stays clean, safe, and completely free of drifting dust particles.
Our experienced craftsmen work diligently, paying close attention to every tiny corner and drain flange.
Since we live and work nearby in this lovely community of 9,539 people, we treat your home with absolute respect.
Indeed, we take great pride in helping our neighbors throughout Mayes County upgrade their properties without breaking the bank.
Once the final shiny topcoat is dry, we carefully remove all our masking tape and protective plastic.
We then leave you with clear instructions on how to care for your newly coated, glassy surface.
This simple guidance helps you maintain that breathtaking luster for many years to come.
You must avoid abrasive scouring powders and harsh scrub sponges if you want the shine to last.
These rough tools will scratch the acrylic glaze over time, making it look dull and holding onto dirt.
Instead, you should clean the surface using mild dish soap and a soft microfiber cloth.
Leaky faucets must be fixed quickly because constant dripping will eventually erode even the strongest coatings.
Standing water creates mineral deposits that stain the beautiful finish and ruin the smooth texture.
By fixing leaks early, you protect your investment and keep your bathroom looking pristine.
Never leave wet bottles of shampoo or heavy metal cans sitting directly on the newly coated ledge.
Moisture trapped underneath these items can cause the finish to blister or discolor prematurely.
Using a hanging shower caddy is a simple way to keep your bath products organized and off the delicate surface.
We love working in this historic area of Oklahoma, where the median household income keeps families looking for smart savings.
Whether you live in ZIP code 74361 or 74362, we are just a quick phone call away from your driveway.
Our deep roots in the local region mean we understand the common water mineral issues that stain your household fixtures.
We know that local folks appreciate honest labor, punctuality, and friendly customer service.
That is why we never use high-pressure sales tactics or hide extra fees inside our written contracts.
When you work with us, you get straightforward answers and beautiful craftsmanship from people who truly care.
If your bathroom looks dark, outdated, or just plain dirty, we have the perfect cost-effective solution for you.
Let us transform your stained, chipped, or ugly basin into a brilliant masterpiece that you can actually enjoy using.
Contact our friendly team today to schedule your free on-site consultation and get a detailed, no-obligation estimate!
Three quiet stages carry the whole result. They are also the ones nobody sees in the after photo.
Stage 1 of 3
A reglaze fails or lasts on what happens before the gun comes out. The old surface gets scrubbed of soap film and silicone, etched or primed so the new material has something to grip, then wet sanded until it feels like fine paper. Skip any of that and the prettiest coat in the world lets go within a year, which is exactly the story most peeling tubs tell us.
Stage 2 of 3
Chips, rust blooms and worn drain rings are ground back to sound material and rebuilt with polyester filler, then sanded flush until a fingertip cannot find the spot. Coating over damage only photographs well on day one; a repair you cannot feel is what keeps the finish honest for years.
Stage 3 of 3
The topcoat goes on in fine sprayed passes with an extractor pulling air out the window the whole time. Sprayed layers flow together into one even skin, which is why the result reads as gloss rather than as paint. Brushes and rollers leave the texture that gives cheap refinishing its reputation.
Three real ways out of a worn tub. We only do the first one, so the other two columns are simply what we would tell a friend.
| The question | Reglazing in place | Acrylic liner | Full replacement |
|---|---|---|---|
| What a standard tub costs | $350 to $800 | $1,600 to $4,000 | $3,000 to $10,000 once walls and plumbing join in |
| Bathroom out of action | One day, then the cure | Weeks of lead time, then a fitting day | One to two weeks of trades |
| Demolition involved | None at all | None, but the old tub is sealed inside | Walls opened, floor patched, debris hauled |
| Honest life expectancy | Five years and up when cared for | Long, unless water creeps between the shells | Decades |
| Watch out for | Prep shortcuts by cut-rate crews | A spongy feel and hidden moisture | The budget doubling mid-project |
If your tub is cracked through, actively leaking underneath, or you simply want a different fixture, reglazing is the wrong tool, a verdict you will hear on the very first call.
Pass 1
Soap scum, silicone and old wax stripped, then the surface etched or bonded so the coating can bite.
Pass 2
Every ding ground out, filled and sanded flush. The repairs disappear under the coating instead of through it.
Pass 3
Tile, faucet, floor and glass papered off. Overspray lands on masking paper, never on grout or chrome.
Pass 4
Primer, then gloss coats laid on in thin passes until the surface reads as one poured skin.
Pass 5
The finish hardens on its own clock, 24 to 48 hours. We tape the door and leave the tub in peace.
Pass 6
Old caulk goes out with the old finish. A new mildew-resistant bead seals tub to tile on the way out.
A reglazed tub is your old tub wearing a professional coating. That is a fine thing to be, as long as everyone knows it going in.
A sprayed acrylic urethane skin, bonded to prepared porcelain, steel or fiberglass. It is smooth, glossy, warm to the touch and fully waterproof. Done properly it gives five years and more of daily service, and plenty of our tubs sail well past that with nothing but gentle cleaning.
It is not factory enamel fired onto iron at kiln temperatures, and no honest refinisher will tell you otherwise. It can be scratched by grit, dulled by harsh powders and lifted by standing water in a spot where caulk has failed. It is a durable coating, not a new tub, and it is priced like one.
Two minutes
ZIP, what the tub is made of, what bothers you about it. Said out loud it goes faster than typing, and a photo can follow later if the case is odd.
The same call
The technician who would do the work asks his questions and names a firm figure for a standard job, then confirms it in writing before any van is booked.
You set the date
One van, one technician, drop cloths from the front door to the bathroom. Water off for nothing; only the tub is out of service.
Most of that day
Damage filled and sanded, the room masked, extractor running, then the primer and gloss coats go on in thin, even passes.
24 to 48 hours
The finish hardens untouched, the new caulk bead goes in, and you run the first bath knowing exactly what was done and what to expect of it.
| What we quote | Typical range | Reading the number |
|---|---|---|
| Standard bathtub, reglazed complete | $350 - $800 | Clean, etch, repairs, sprayed gloss and fresh caulk. |
| Chip or rust repair alone | $150 - $300 | When the finish is sound and only one wound needs closing. |
| Clawfoot tub, inside and out | $700 - $1,300 | Two surfaces, more masking, and paint-grade feet if you wish. |
| Shower pan or base | $300 - $550 | Same process on the floor you stand on every morning. |
| Caulk renewal with the job | $90 - $180 | Old bead cut out, mildew-resistant line laid in. |
| Small job minimum | around $250 | The van, the materials and the cure time exist even for tiny work. |
Heavy previous coatings that must be stripped, unusual colors and badly pitted iron push a job toward the top of its bracket. The written price reaches you before the van is even loaded, and it holds.
Ventilation is not a courtesy, it is part of the job. The extractor runs from the first solvent wipe to the last sprayed pass, pulling air out the window instead of through your hallway, and the technician wears supplied air even when the household has gone out for the day. By the evening the bathroom smells like a bathroom again.
The materials are the professional two-part systems made for this trade, mixed fresh on site, never the single-can kits sold next to the paint rollers. It is the difference between a finish that cures into a hard skin and one that stays soft enough to peel at the drain within a season, and it is most of the reason our work carries a written workmanship promise against peeling and loss of adhesion.
And the schedule respects the cure. We tell you in writing when the tub goes back into service, 24 hours for most jobs and 48 for the cautious ones, because handing a family a beautiful surface and letting them ruin it that same night helps nobody. If anything in our workmanship lets go early, the technician comes back and makes it right without a discussion about whose fault the water was.
Strong while spraying, gone surprisingly fast. The extractor vents the room to the outside for the whole job around Pryor, so the rest of the home stays livable, and by the next morning the odor has left with the fumes. Pregnant households and bird owners get the frank version of this talk before booking.
Between 24 and 48 hours after the final coat, and the exact time is written on the paperwork you keep. The first bath is not a gamble; it is a date.
Any color. The most common request is retiring an avocado, pink or almond tub to white, and the coating is tinted before it is sprayed, so the new color is in the material rather than painted over it.
Yes. The prep changes, the primer changes, the result reads the same. Fiberglass with soft, flexing spots gets extra reinforcement talk first, because coating a moving floor is how warranties die.
Now the old coating comes fully off, which is honest work we price plainly, and then the job proceeds as if the tub had never been touched. Peeling almost always means the first crew skipped the etch or sprayed over silicone, not that your tub rejects coatings.
Five years is the floor we are comfortable promising out loud, not the ceiling. With soft cleaners, no standing mats and caulk kept sound, these finishes routinely serve a decade. What we refuse to do is whisper twenty and hope you lose our number.
Zoom for the lay of the land; the link lists further down name every community the van reaches from here.
The technician who picks up when you call works these streets, so the ledger below is home turf rather than trivia.
Somewhere under that worn surface is the tub you chose. One day brings it back.
Call (866) 951-0558