A dull or chipped tub in Rogers does not need a demolition crew. It needs one technician, one day and a sprayed finish that shines.
One number reaches the technician who would hold the gun. The figure comes on the call, not after a visit.
(866) 951-0558The voice on the line belongs to the trade, not to a switchboard reading a script. Two minutes of plain description are enough to price a standard tub.
Your bathroom should feel like a private sanctuary where you can wash away the stress of a long day.
Unfortunately, a stained, chipped, or outdated tub can completely ruin that relaxing experience.
If you live in Barnes County, you can easily restore your tub to its former glory without spending a fortune on a massive remodel.
Replacing a cast iron or porcelain fixture involves ripping out walls and paying thousands of dollars to plumbers.
Instead of dealing with that massive headache, you can choose a smart, cost-effective alternative that makes your surface look brand new in just a few hours.
Our professional crew comes right to your home to apply a durable, high-gloss liquid acrylic coating that bonds directly to your existing fixture.
This budget-friendly process seals up ugly pores and cracks where dangerous mold and mildew love to hide.
Which means you get a sparkling, hygienic surface that is incredibly easy to wipe down and keep clean.
You deserve a beautiful bathroom, so contact us today to get your free estimate and start your home transformation.
Over the years, harsh chemical cleaners and abrasive scrub brushes strip away the original protective factory glaze on your tub.
Once that protective barrier disappears, the underlying material becomes porous and starts absorbing dirt, oils, and rust from your water.
This leaves you with an embarrassing, yellowed appearance that no amount of scrubbing can ever fix.
To fix this, our field technicians perform a meticulous preparation process that is the absolute key to a long-lasting finish.
First, we use specialized acid cleaners to strip away old soap scum, mineral deposits, and body oils from the surface.
After that, we carefully patch any deep chips, rust spots, or physical dings with a premium waterproof polyester filler.
Once the surface is completely flat and dry, we apply a proprietary bonding agent that acts like chemical Velcro.
Then, we spray several coats of a high-tech aliphatic polyurethane acrylic finish using specialized high-volume, low-pressure equipment.
This advanced material cures into an incredibly hard, glossy shell that looks exactly like brand-new porcelain.
To help you understand the major differences between our process and a full replacement, we put together a handy comparison table:
| Feature | Our Surface Restoration | Full Tub Replacement |
|---|---|---|
| Average Cost | Very affordable and budget-friendly | Extremely expensive with plumbing fees |
| Time to Complete | Finished in 4 to 6 hours | Takes several days or weeks of construction |
| Mess & Demolition | Zero demolition and no broken tile | Massive mess, drywall dust, and debris |
| Durability | Lasts 10 to 15 years with proper care | Lasts decades but requires huge upfront cost |
Living in a quiet community with 54 residents means that word of mouth and trust are everything to us.
We take immense pride in helping our neighbors in the 58479 ZIP code area update their homes without breaking the bank.
Since the median household income here sits around $60,938, we know that spending thousands on a bathroom remodel is not always a realistic option.
By choosing our specialized surface renewal method, you save enough money to focus on other important home maintenance tasks.
On top of that, our process keeps heavy, old cast iron fixtures out of our local North Dakota landfills.
This eco-friendly approach allows you to preserve the character of your classic home while enjoying modern cleanliness.
Our team works fast and clean, ensuring we leave your home in pristine condition when we pack up our tools.
We use professional ventilation systems to pull any chemical fumes out of your house during the spraying process.
This means your family can breathe easy while we work on making your bathroom look like a million bucks.
Initially, you might wonder how we achieve such a glass-like finish without actually removing the tub from your bathroom.
The secret lies in our meticulous attention to detail and our refusal to cut corners during the preparation phase.
We mask off your entire bathroom with protective paper and plastic sheets to shield your walls, floors, and vanity from overspray.
Next, we remove the old, moldy silicone caulk from around the edges of the tub to ensure a clean seal.
This step prevents moisture from getting trapped under the new coating, which could cause peeling later down the road.
Our technicians then apply the primer coat, which is designed to fuse with both the old tub and the new topcoat.
After the primer sets, we carefully spray the topcoat in multiple thin layers to prevent any runs or uneven sagging.
This creates a seamless, non-porous barrier that successfully resists water penetration, impact, and daily wear and tear.
Finally, we apply fresh, mildew-resistant caulk along the grout lines to give your project a clean, professional finish.
Fortunately, keeping your renewed tub clean is much easier than scrubbing an old, worn-out surface.
Because the new acrylic polyurethane finish is completely non-porous, dirt and soap scum cannot bond to it.
This means you can say goodbye to harsh bleach, abrasive powders, and heavy scrubbing pads forever.
Instead, you simply wipe down the surface with a mild dish soap or a non-abrasive liquid cleaner and a soft sponge.
This gentle routine preserves the brilliant shine and ensures your tub looks beautiful for many years to come.
We also recommend keeping your dripping faucets repaired, as constant water drops can eventually wear down any glossy surface.
Another smart tip is to avoid using bath mats with suction cups, which can pull at the new coating over time.
If you want extra slip resistance, we can easily apply a permanent non-slip texture to the bottom of your tub during our process.
This thoughtful option keeps your family safe while preserving the beautiful look of your newly refinished bathroom.
Perhaps you are tired of looking at that ugly, outdated color or those rusty stains every single morning.
You do not have to live with a dingy bathroom anymore, especially when a affordable solution is just a phone call away.
We are ready to drive out to your property in Rogers, North Dakota, to inspect your tub and discuss your options.
Our friendly team will answer all your questions and provide a detailed, honest estimate with absolutely no hidden fees.
This free quote gives you the exact cost upfront so you can make the best decision for your home and budget.
Let us handle the hard work and bring back the sparkle and cozy warmth to your bathing space.
Grab your phone to schedule your free, no-obligation consultation.
We love helping our local community fall in love with their bathrooms all over again.
Take the first step toward a cleaner, brighter home today and let us transform your worn-out fixture into a masterpiece!
Three quiet stages carry the whole result. They are also the ones nobody sees in the after photo.
Stage 1 of 3
A reglaze fails or lasts on what happens before the gun comes out. The old surface gets scrubbed of soap film and silicone, etched or primed so the new material has something to grip, then wet sanded until it feels like fine paper. Skip any of that and the prettiest coat in the world lets go within a year, which is exactly the story most peeling tubs tell us.
Stage 2 of 3
Chips, rust blooms and worn drain rings are ground back to sound material and rebuilt with polyester filler, then sanded flush until a fingertip cannot find the spot. Coating over damage only photographs well on day one; a repair you cannot feel is what keeps the finish honest for years.
Stage 3 of 3
The topcoat goes on in fine sprayed passes with an extractor pulling air out the window the whole time. Sprayed layers flow together into one even skin, which is why the result reads as gloss rather than as paint. Brushes and rollers leave the texture that gives cheap refinishing its reputation.
Three real ways out of a worn tub. We only do the first one, so the other two columns are simply what we would tell a friend.
| The question | Reglazing in place | Acrylic liner | Full replacement |
|---|---|---|---|
| What a standard tub costs | $350 to $800 | $1,600 to $4,000 | $3,000 to $10,000 once walls and plumbing join in |
| Bathroom out of action | One day, then the cure | Weeks of lead time, then a fitting day | One to two weeks of trades |
| Demolition involved | None at all | None, but the old tub is sealed inside | Walls opened, floor patched, debris hauled |
| Honest life expectancy | Five years and up when cared for | Long, unless water creeps between the shells | Decades |
| Watch out for | Prep shortcuts by cut-rate crews | A spongy feel and hidden moisture | The budget doubling mid-project |
If your tub is cracked through, actively leaking underneath, or you simply want a different fixture, reglazing is the wrong tool, a verdict you will hear on the very first call.
Pass 1
Soap scum, silicone and old wax stripped, then the surface etched or bonded so the coating can bite.
Pass 2
Every ding ground out, filled and sanded flush. The repairs disappear under the coating instead of through it.
Pass 3
Tile, faucet, floor and glass papered off. Overspray lands on masking paper, never on grout or chrome.
Pass 4
Primer, then gloss coats laid on in thin passes until the surface reads as one poured skin.
Pass 5
The finish hardens on its own clock, 24 to 48 hours. We tape the door and leave the tub in peace.
Pass 6
Old caulk goes out with the old finish. A new mildew-resistant bead seals tub to tile on the way out.
A reglazed tub is your old tub wearing a professional coating. That is a fine thing to be, as long as everyone knows it going in.
A sprayed acrylic urethane skin, bonded to prepared porcelain, steel or fiberglass. It is smooth, glossy, warm to the touch and fully waterproof. Done properly it gives five years and more of daily service, and plenty of our tubs sail well past that with nothing but gentle cleaning.
It is not factory enamel fired onto iron at kiln temperatures, and no honest refinisher will tell you otherwise. It can be scratched by grit, dulled by harsh powders and lifted by standing water in a spot where caulk has failed. It is a durable coating, not a new tub, and it is priced like one.
Two minutes
ZIP, what the tub is made of, what bothers you about it. Said out loud it goes faster than typing, and a photo can follow later if the case is odd.
The same call
The technician who would do the work asks his questions and names a firm figure for a standard job, then confirms it in writing before any van is booked.
You set the date
One van, one technician, drop cloths from the front door to the bathroom. Water off for nothing; only the tub is out of service.
Most of that day
Damage filled and sanded, the room masked, extractor running, then the primer and gloss coats go on in thin, even passes.
24 to 48 hours
The finish hardens untouched, the new caulk bead goes in, and you run the first bath knowing exactly what was done and what to expect of it.
| What we quote | Typical range | Reading the number |
|---|---|---|
| Standard bathtub, reglazed complete | $350 - $800 | Clean, etch, repairs, sprayed gloss and fresh caulk. |
| Chip or rust repair alone | $150 - $300 | When the finish is sound and only one wound needs closing. |
| Clawfoot tub, inside and out | $700 - $1,300 | Two surfaces, more masking, and paint-grade feet if you wish. |
| Shower pan or base | $300 - $550 | Same process on the floor you stand on every morning. |
| Caulk renewal with the job | $90 - $180 | Old bead cut out, mildew-resistant line laid in. |
| Small job minimum | around $250 | The van, the materials and the cure time exist even for tiny work. |
Heavy previous coatings that must be stripped, unusual colors and badly pitted iron push a job toward the top of its bracket. The written price reaches you before the van is even loaded, and it holds.
Ventilation is not a courtesy, it is part of the job. The extractor runs from the first solvent wipe to the last sprayed pass, pulling air out the window instead of through your hallway, and the technician wears supplied air even when the household has gone out for the day. By the evening the bathroom smells like a bathroom again.
The materials are the professional two-part systems made for this trade, mixed fresh on site, never the single-can kits sold next to the paint rollers. It is the difference between a finish that cures into a hard skin and one that stays soft enough to peel at the drain within a season, and it is most of the reason our work carries a written workmanship promise against peeling and loss of adhesion.
And the schedule respects the cure. We tell you in writing when the tub goes back into service, 24 hours for most jobs and 48 for the cautious ones, because handing a family a beautiful surface and letting them ruin it that same night helps nobody. If anything in our workmanship lets go early, the technician comes back and makes it right without a discussion about whose fault the water was.
Strong while spraying, gone surprisingly fast. The extractor vents the room to the outside for the whole job around Rogers, so the rest of the home stays livable, and by the next morning the odor has left with the fumes. Pregnant households and bird owners get the frank version of this talk before booking.
Between 24 and 48 hours after the final coat, and the exact time is written on the paperwork you keep. The first bath is not a gamble; it is a date.
Any color. The most common request is retiring an avocado, pink or almond tub to white, and the coating is tinted before it is sprayed, so the new color is in the material rather than painted over it.
Yes. The prep changes, the primer changes, the result reads the same. Fiberglass with soft, flexing spots gets extra reinforcement talk first, because coating a moving floor is how warranties die.
Now the old coating comes fully off, which is honest work we price plainly, and then the job proceeds as if the tub had never been touched. Peeling almost always means the first crew skipped the etch or sprayed over silicone, not that your tub rejects coatings.
Five years is the floor we are comfortable promising out loud, not the ceiling. With soft cleaners, no standing mats and caulk kept sound, these finishes routinely serve a decade. What we refuse to do is whisper twenty and hope you lose our number.
Zoom for the lay of the land; the link lists further down name every community the van reaches from here.
The technician who picks up when you call works these streets, so the ledger below is home turf rather than trivia.
Somewhere under that worn surface is the tub you chose. One day brings it back.
Call (866) 951-0558