A dull or chipped tub in Scriba does not need a demolition crew. It needs one technician, one day and a sprayed finish that shines.
One number reaches the technician who would hold the gun. The figure comes on the call, not after a visit.
(866) 951-0558The voice on the line belongs to the trade, not to a switchboard reading a script. Two minutes of plain description are enough to price a standard tub.
Are you tired of looking at that stained or cracked basin in your bathroom every single morning? You can actually transform that tired old space into a shiny oasis without ripping everything out of the floor.
Everything starts with a simple choice to fix what you already own instead of tossing it away. This process saves you tons of cash while giving your home a fresh look.
Most people think buying a brand new tub is the only way to get that sparkle back. Actually, you can achieve the same result with a high-end chemical coating that sticks like glue to your current unit.
This method avoids the massive headache of demolition work in your house. You keep your walls intact and your plumbing stays right where it belongs during the whole job.
Think about the savings you get when you skip the contractor fees for heavy labor. You get a result that feels just like a brand new installation for a fraction of the cost.
This specialized work involves stripping away years of soap scum and mineral buildup to reach the base material. Once that surface is clean, we apply a durable synthetic finish that hardens into a smooth shield.
Initially, the technician will mask off your walls and fixtures to protect them from any spray. Then, the team uses strong cleaning agents to remove any lingering oils or old finish bits.
After the cleaning, any chips or deep scratches get filled with a special bonding agent. This ensures that the final layer stays flat and smooth across the entire basin.
Following that, multiple layers of a high-strength acrylic resin are applied using a specialized spray gun. These layers cure over a day or two to become incredibly hard and resistant to daily scrubbing.
Choosing a local person from Oswego County means you get someone who cares about your reputation in the neighborhood. We know how much folks around here value a job done right the first time.
Since we are neighbors, you can count on us to show up on schedule and keep things tidy. We respect your space and treat your home like it were our own.
You might wonder how this holds up against the tough water conditions found in upstate New York. Our materials are designed to handle hard water and frequent use without peeling or yellowing over time.
This gives you a sense of relief knowing your money was spent on a lasting upgrade. You get the benefit of a stunning aesthetic without the stress of a massive renovation project.
When you consider the median household income in this area, you want to make sure your investments provide real value. This specific service adds immediate appeal to your home if you ever plan to put it on the market.
Buyers love a bathroom that looks clean and updated rather than one that looks decades old. You get a better return on your investment compared to a full bathroom gut job.
You have several options when it comes to the final look of your rejuvenated fixture. Some folks prefer a classic high-gloss white finish that makes the room feel brighter and larger.
Other homeowners might want a soft matte look that feels a bit more modern. You can discuss these options during a free consultation at your property.
| Feature | Benefit for you | |
|---|---|---|
| Quick turnaround | Less downtime for your bathroom | |
| Durability | Resists chips and cracks for years | |
| Easy cleaning | Spend less time scrubbing grime | |
| Cost-effective | Keeps your budget in check |
This table shows exactly why so many people choose this path over a full replacement. You get all the pros of a new unit without the heavy mess.
When you live in zip codes like 13126, you want a service that understands the local vibe and needs. We handle all the prep work so you do not have to worry about the heavy lifting.
Everything we use is low-odor and safe for home use once the curing process finishes. You simply wait the recommended time before running the water again.
After that brief waiting period, your tub is ready for action. You will be amazed at how much better your morning routine feels with a smooth and clean surface to step into.
Once the work is complete, you should avoid using abrasive cleaners that might scratch the new finish. A simple soft sponge and mild soap will keep the shine looking great for a long time.
Do not use harsh chemicals or bleach products on the new layer. These can soften the surface and take away that nice finish you just paid to have installed.
By following these simple care steps, you protect your investment and enjoy the results for many years. It really is that easy to maintain the high quality of your bathroom.
If you are ready to see what is possible for your specific bathroom, we are happy to come take a look. We offer a free estimate so you know exactly what to expect before any work starts.
You can ask us any questions about the materials or the time frame during our visit. We want you to feel totally confident in the decision to proceed with the renewal.
Getting a quote is the easiest way to start your home improvement journey. You simply reach out and let us know when is a good time to stop by your location.
There is no sense in living with a stained or dated fixture for another year. You deserve a bathroom that feels like a place of calm and comfort for your daily routines.
Each day you wait is another day you spend looking at a sink or tub that does not make you happy. You have the power to change that right now with a single conversation.
Walking into a bathroom that looks brand new changes how you start your day. It gives you a sense of pride in your living space and improves your overall experience at home.
You will find yourself wanting to spend more time getting ready because the environment feels so much better. It is a small change that brings a massive amount of joy.
When you schedule your appointment, we ask that you clear off any personal items from the vanity and tub area. This helps us work faster and more efficiently inside your home.
You should also ensure that we have clear access to the bathroom during the scheduled time. This keeps the whole process smooth and prevents any accidental damage to your items.
People often ask if the fumes are overwhelming during the application. We use ventilation systems that pull the air out of the room to keep things comfortable for you.
Another common question is how long the finish will last under normal use. With proper care and cleaning, this solution stays looking sharp for many years to come.
You might wonder if we can change the color of your old unit. We can definitely match a variety of shades if you want a different look than your original piece.
Living in a town with a population of 6,840 means you value quality local service. You want to support tradespeople who understand the local housing stock and architecture.
We have seen all kinds of bathroom setups in this region and know how to handle them all. Whether you have an old clawfoot tub or a modern shower insert, we have a solution.
Now is the perfect moment to request your free estimate and see how affordable this transformation really is. You have nothing to lose by asking for the numbers.
Once you have the quote in your hands, you can make an informed decision for your home. You will be surprised at how much sense it makes to choose this path.
Everything is set up to provide you with the best service in the entire county. You just need to reach out and schedule your visit today.
You will love the way your bathroom looks after we finish our work. It truly is a game changer for any homeowner who wants to refresh their space without a huge mess.
We look forward to meeting you and helping you achieve the bathroom of your dreams. Your journey toward a beautiful home starts with this simple step.
Three quiet stages carry the whole result. They are also the ones nobody sees in the after photo.
Stage 1 of 3
A reglaze fails or lasts on what happens before the gun comes out. The old surface gets scrubbed of soap film and silicone, etched or primed so the new material has something to grip, then wet sanded until it feels like fine paper. Skip any of that and the prettiest coat in the world lets go within a year, which is exactly the story most peeling tubs tell us.
Stage 2 of 3
Chips, rust blooms and worn drain rings are ground back to sound material and rebuilt with polyester filler, then sanded flush until a fingertip cannot find the spot. Coating over damage only photographs well on day one; a repair you cannot feel is what keeps the finish honest for years.
Stage 3 of 3
The topcoat goes on in fine sprayed passes with an extractor pulling air out the window the whole time. Sprayed layers flow together into one even skin, which is why the result reads as gloss rather than as paint. Brushes and rollers leave the texture that gives cheap refinishing its reputation.
Three real ways out of a worn tub. We only do the first one, so the other two columns are simply what we would tell a friend.
| The question | Reglazing in place | Acrylic liner | Full replacement |
|---|---|---|---|
| What a standard tub costs | $350 to $800 | $1,600 to $4,000 | $3,000 to $10,000 once walls and plumbing join in |
| Bathroom out of action | One day, then the cure | Weeks of lead time, then a fitting day | One to two weeks of trades |
| Demolition involved | None at all | None, but the old tub is sealed inside | Walls opened, floor patched, debris hauled |
| Honest life expectancy | Five years and up when cared for | Long, unless water creeps between the shells | Decades |
| Watch out for | Prep shortcuts by cut-rate crews | A spongy feel and hidden moisture | The budget doubling mid-project |
If your tub is cracked through, actively leaking underneath, or you simply want a different fixture, reglazing is the wrong tool, a verdict you will hear on the very first call.
Pass 1
Soap scum, silicone and old wax stripped, then the surface etched or bonded so the coating can bite.
Pass 2
Every ding ground out, filled and sanded flush. The repairs disappear under the coating instead of through it.
Pass 3
Tile, faucet, floor and glass papered off. Overspray lands on masking paper, never on grout or chrome.
Pass 4
Primer, then gloss coats laid on in thin passes until the surface reads as one poured skin.
Pass 5
The finish hardens on its own clock, 24 to 48 hours. We tape the door and leave the tub in peace.
Pass 6
Old caulk goes out with the old finish. A new mildew-resistant bead seals tub to tile on the way out.
A reglazed tub is your old tub wearing a professional coating. That is a fine thing to be, as long as everyone knows it going in.
A sprayed acrylic urethane skin, bonded to prepared porcelain, steel or fiberglass. It is smooth, glossy, warm to the touch and fully waterproof. Done properly it gives five years and more of daily service, and plenty of our tubs sail well past that with nothing but gentle cleaning.
It is not factory enamel fired onto iron at kiln temperatures, and no honest refinisher will tell you otherwise. It can be scratched by grit, dulled by harsh powders and lifted by standing water in a spot where caulk has failed. It is a durable coating, not a new tub, and it is priced like one.
Two minutes
ZIP, what the tub is made of, what bothers you about it. Said out loud it goes faster than typing, and a photo can follow later if the case is odd.
The same call
The technician who would do the work asks his questions and names a firm figure for a standard job, then confirms it in writing before any van is booked.
You set the date
One van, one technician, drop cloths from the front door to the bathroom. Water off for nothing; only the tub is out of service.
Most of that day
Damage filled and sanded, the room masked, extractor running, then the primer and gloss coats go on in thin, even passes.
24 to 48 hours
The finish hardens untouched, the new caulk bead goes in, and you run the first bath knowing exactly what was done and what to expect of it.
| What we quote | Typical range | Reading the number |
|---|---|---|
| Standard bathtub, reglazed complete | $350 - $800 | Clean, etch, repairs, sprayed gloss and fresh caulk. |
| Chip or rust repair alone | $150 - $300 | When the finish is sound and only one wound needs closing. |
| Clawfoot tub, inside and out | $700 - $1,300 | Two surfaces, more masking, and paint-grade feet if you wish. |
| Shower pan or base | $300 - $550 | Same process on the floor you stand on every morning. |
| Caulk renewal with the job | $90 - $180 | Old bead cut out, mildew-resistant line laid in. |
| Small job minimum | around $250 | The van, the materials and the cure time exist even for tiny work. |
Heavy previous coatings that must be stripped, unusual colors and badly pitted iron push a job toward the top of its bracket. The written price reaches you before the van is even loaded, and it holds.
Ventilation is not a courtesy, it is part of the job. The extractor runs from the first solvent wipe to the last sprayed pass, pulling air out the window instead of through your hallway, and the technician wears supplied air even when the household has gone out for the day. By the evening the bathroom smells like a bathroom again.
The materials are the professional two-part systems made for this trade, mixed fresh on site, never the single-can kits sold next to the paint rollers. It is the difference between a finish that cures into a hard skin and one that stays soft enough to peel at the drain within a season, and it is most of the reason our work carries a written workmanship promise against peeling and loss of adhesion.
And the schedule respects the cure. We tell you in writing when the tub goes back into service, 24 hours for most jobs and 48 for the cautious ones, because handing a family a beautiful surface and letting them ruin it that same night helps nobody. If anything in our workmanship lets go early, the technician comes back and makes it right without a discussion about whose fault the water was.
Strong while spraying, gone surprisingly fast. The extractor vents the room to the outside for the whole job around Scriba, so the rest of the home stays livable, and by the next morning the odor has left with the fumes. Pregnant households and bird owners get the frank version of this talk before booking.
Between 24 and 48 hours after the final coat, and the exact time is written on the paperwork you keep. The first bath is not a gamble; it is a date.
Any color. The most common request is retiring an avocado, pink or almond tub to white, and the coating is tinted before it is sprayed, so the new color is in the material rather than painted over it.
Yes. The prep changes, the primer changes, the result reads the same. Fiberglass with soft, flexing spots gets extra reinforcement talk first, because coating a moving floor is how warranties die.
Now the old coating comes fully off, which is honest work we price plainly, and then the job proceeds as if the tub had never been touched. Peeling almost always means the first crew skipped the etch or sprayed over silicone, not that your tub rejects coatings.
Five years is the floor we are comfortable promising out loud, not the ceiling. With soft cleaners, no standing mats and caulk kept sound, these finishes routinely serve a decade. What we refuse to do is whisper twenty and hope you lose our number.
Zoom for the lay of the land; the link lists further down name every community the van reaches from here.
The technician who picks up when you call works these streets, so the ledger below is home turf rather than trivia.
Somewhere under that worn surface is the tub you chose. One day brings it back.
Call (866) 951-0558